Table of Contents
Advertisement
No
Item
14
15
16
17
18
19
20
21
22
Function
Cutting program setting
Material cutting
reference
PLC monitor
Error report
Quick approach function
indicator
Saw blade down
indicator
Rear vise status
indicator
Front vise status
indicator
Feeding movement
indicator
Description
cutting programs can be set.)
Blade deviation detector (optional) can be also configured in
this setup page.
Refer to Cutting Display & Setup in the following page.
Press this button to directly enter the cutting job program
setup page.
A total of 100 cutting programs can be set.
This reference chart lists out the required blade speed and
cutting rate for each different material.
Shows current PLC signals.
Lists a historical report of the errors and the time of
occurrence as well as provides troubleshooting support. 6
pages in total.
Indicates that the quick approach bar is contacting the
upper limit switch.
When quick approach function is activated, the saw blade
icon will turn solid white.
Indicates that a cut is completed and the saw blade is at its
lowest position.
When the blade completes each cut and triggers the lower
limit switch, the saw blade icon will turn solid white.
Indicates if the rear vises have clamped and secured the
workpiece.
When the rear vises have secured the workpiece, the
clamping vise icon on the right will turn solid white.
Indicates if the front vises have clamped and secured the
workpiece.
When the front vises have secured the workpiece, the
clamping vise icon on the right will turn solid white.
When the feeding vise reaches the front limit, the vise set
icon will turn solid white.
4‐11
Advertisement
Table of Contents
