Table of Contents
Advertisement
Leveling
Place spirit level on the vise slide plates and the work
feed table.
Level the machine in both directions i.e. along and
across the machine. Adjust the level of the machine by
turning the leveling bolts.
Make sure all leveling bolts evenly support the
machine weight.
Anchoring the machine
Normally there is no need to anchor the machine. If the machine is likely to vibrate, fix the machine
to the floor with anchor bolts.
Shock absorption steel plates are provided and can be placed under each leveling bolt to prevent
their sinking into the concrete floor.
Installing roller table (optional)
The roller table is used to support long material at
the rear and/or the front of the machine.
If you have ordered the optional roller table for
cutting long material, position it before or behind
the machine.
Level the roller table and the stand with the
machine by adjusting the leveling bolts.
Adjust bolts
3-9
Advertisement
Table of Contents
