Advertisement
•
Single Slot USB/Serial Cradle
•
Vehicle Cradle.
To charge the main battery:
Connect the charging accessory to the appropriate power source.
1.
Insert the FR6074 into a cradle or attach to a cable. The FR6074 begins charging. The Charging/Battery Status
2.
LED blinks amber while charging, then turns solid amber when fully charged. See
indications.
The 3600 mAh battery fully charges in approximately five hours.
LED Charge Indicators
Table 1-2
Charging/Battery
Status LED
Off
Slow Blinking Amber
(1 blink every 2 seconds)
Solid Green
Fast Blinking Red
(2 blinks/second)
LED Charge Indicators (Continued)
Table 1-2
Charging/Battery Status LED
Single Blink Amber (when device is turned on)
Blink Amber (Battery charger temperature is too
high.)
Charging Spare Batteries
See
Chapter 6, Accessories
Charging Temperature
Charge batteries in temperatures from 0°C to 45°C (32°F to 113°F). Charging is intelligently controlled by the
FR6074.
To accomplish this, for small periods of time, the FR6074 or accessory alternately enables and disables battery
charging to keep the battery at acceptable temperatures. The FR6074 or accessory indicates when charging is
disabled due to abnormal temperatures via its LED. See
Powering On the FR6074
Press the Power button to turn on the FR6074. If the FR6074 does not power on perform a warm boot. See
FR6074 is not charging.
FR6074 is not inserted correctly in the cradle or connected to a power
source. Charger/cradle is not powered.
FR6074 is charging.
Charging complete.
Note: When the battery is initially inserted in the FR6074, the amber LED
flashes once if the battery power is low or the battery is not fully inserted.
Charging error, e.g.:
•
Temperature is too low or too high.
•
Charging has gone on too long without completion (typically eight hours).
Battery depleted.
Battery over-temperature condition.
for information on using accessories to change spare batteries.
Indication
Indication
Table
1-2.
17
Getting Started
Table 1-2
for charging
Resetting
Advertisement
