Advertisement
Troubleshooting the FR6074 (Continued)
Table 7-1
Problem
The FR6074 does
not accept scan
input.
Bluetooth Connection
Troubleshooting Bluetooth Connection
Table 7-2
Problem
FR6074 cannot find
any Bluetooth
devices nearby.
When trying to
connect a Bluetooth
phone and FR6074,
the phone thinks a
previously paired
FR6074 is used.
Cause
Scanning
Load a scanning application on the FR6074. See the
application is not
system administrator.
loaded.
Unreadable bar
Ensure the symbol is not defaced.
code.
Distance between
Place the FR6074 within proper scanning range.
exit window and bar
code is incorrect.
FR6074 is not
Program the FR6074 to accept the type of bar code being scanned.
programmed for the
bar code.
FR6074 is not
If the FR6074 does not beep on a good decode, set the application
programmed to
to generate a beep on good decode.
generate a beep.
Battery is low.
If the scanner stops emitting a laser beam upon a trigger press,
check the battery level. When the battery is low, the scanner shuts
off before the FR6074 low battery condition notification. Note: If
the scanner is still not reading symbols, contact the distributor or
Motorola.
Cause
Too far from other
Move closer to the other Bluetooth device(s), within a range of 10
Bluetooth devices.
meters.
The Bluetooth
Turn on the Bluetooth device(s).
device(s) nearby are
not turned on.
The Bluetooth
Set the Bluetooth device(s) to discoverable mode. If needed, refer to
device(s) are not in
the device's user documentation for help.
discoverable mode.
The phone
Manually delete the pairing device and name from the phone. Refer
remembers the
to the phone's user documentation for instructions.
name and address
of the FR6074 it
last paired with via
the Bluetooth
radio.
Maintenance & Troubleshooting
Solution
Solution
97
Advertisement
