How To Wear; Pair For The �Rst Time - Philips TAT1209 User Manual

How to wear

Select suitable ear tips for optimum �t
A tight, secure �t will provide the best
sound quality and noise-cancellation.
1
Test which ear tips provide you with
the best sound and wearing comfort.
2
3 sizes of silicone ear tips are
provided : large, medium, small.
L M
Insert the earpieces
1
Check left or right orientation of the
earpieces.
2
Insert the earpieces into the ears
and twist slightly until a secure �t is
achieved.
S
Pair the earpieces with
your Bluetooth device for
the �rst time
1
Make sure that the earpieces are fully
charged and powered off.
2
Open the cover of the charging box,
the earpieces will be in pairing mode
and ready to connect.
The LEDs on both earpieces �ash
white and blue alternately
The earpieces are now in pairing
mode and are ready to pair with a
Bluetooth device
(e.g. a mobile phone)
3
Turn on the Bluetooth function of
your Bluetooth device.
4
Pair the earpieces with your
Bluetooth device, refer to the user
manual of your Bluetooth device.
Note
 After powering on, if the earpieces can not �nd
any previously connected Bluetooth device,
please put them into pairing mode (press button
on box for 3 seconds with both earpieces inside
and the cover open).
The following example shows you
how to pair the earpieces with your
Bluetooth device.
1
Turn on the Bluetooth function of
your Bluetooth device, select
Philips TAT1209.
7 EN