Reset The Earpieces; Technical Data - Philips TAT1209 User Manual

5 Reset the
earpieces
If you encounter any pairing or connection
issue, you can follow the following
procedure to reset your earpieces to
factory default settings.
1
On your Bluetooth device, go to the
Bluetooth menu and remove Philips
TAT1209 from the device list.
2
Turn off the Bluetooth function of
your Bluetooth device.
3
Return earpieces to charging box
and open the lid.
4
Press button on box twice.
5
Follow steps in "Use your earpieces-
connect the earpieces to your
Bluetooth device."
6
Pair the earpieces with your
Bluetooth device, select Philips
TAT1209.
If there is no response from the
earpieces, you can follow the below step
to reset the hardware of your earpieces.
Return earpieces to charging box and
open the lid, press the button on box
for more than 10 seconds.

6 Technical data

Music play time : 6 + 12 hours
Standby time: 200 hours
Charging time: 2 hours
Lithium-ion battery 40 mAh on
each earpiece, Lithium-ion battery
300 mAh on charging box
Bluetooth version: 5.3
Compatible Bluetooth pro�les:
• HFP (Hands-Free Pro�le)
• A2DP (Advanced Audio
Distribution Pro�le)
• AVRCP (Audio Video Remote
Control Pro�le)
Supported audio codecs: SBC
Frequency range: 2.402-2.480 GHz
Transmitter power: < 10 dBm
Operating range: Up to 10 meters
(33 feet)
USB-C port for charging
Low battery warning: available
Note
 Speci�cations are subject to change without
notice.
11 EN