Table of Contents
Advertisement
setting
The Auto Cloak function will automatically set the built-in clock (Month,
Day, Year and Time) when the unit is connected to an Antenna or Cable
system and it is turned off, As the unit searches for a receivable station
in your area and it receives a broadcast signal for Auto Clock, the Auto
Clock needs several minutes to set itself.
,
q
Preparation:
• Connect the Antenna or Cable system.
• If you use a cable box, turn it on.
• Plug the AC Power cord to the AC outlet.
Make sure the unit is turned off.
Power
• If you press POWER, the Auto Clock
set is not effective.
Wait at least three minutes
and press POWER.
The POWER indicator wi(( light.
I
POWER
_o_v_R
9
.?,-
Press
DISPLAY
to check the clock on the
screen.
*DISPLAY
O
If the clock is not set, check the antenna
condition.
The Auto Clock may not function
properly
if the reception
condition
is not
good.
The
Auto Clock adjustment
will be performed
at
12:00 PM everyday
if you turn off the unit.
• l[ you use a cable box and you want Auto Clock
adjustment to be performed, the cable box must be (eft
on.
• The Auto Clock adjustment is not effective when there
is a difference of more than 5 minutes exists between
the built-in slack time and the actual time.
When shipped from factory the AUTO CLOCK is set to "ON".
But if you do not want Auto Clock set (Adjustment):
_1
Press MENU.
MENU
SIE_2UP
Press _ or | to select "SYSTEM SETUP",
then press ENTER.
Press _ or { to select "AUTO CLOCK".
Press ENTER to select "OFF",
Press MENU repeatedly until the MENU
screen is cleared.
_eHu
Q
SETUP
• When the AUTO CLOCK is set to
"OFF", the Auto Clock adjustment
does not function.
• Set the c_ock manually _,
2O
Advertisement
Table of Contents
