Table of Contents
Advertisement
Timer recording can be programmed on-screen with the remote control,
The built-in timer arrows automatic unattended recording of up to 8
programs within 1 month.
TV/VCR
• Preparation:
• Press TV/VCR to select the TV/VCR mode.
• Load a cassette tape with the erase prevention tab
intact.
• Check the time and date are correct _#.
Example:
Program a timer recording for 23rd dav, channel t25
(CATV), 7:00 - 9:30 PM (Tape speed : SLP).
Press MENU. Press t or _ to seleot "TIMER
REC SET", then press ENTER.
.E.u
SETUP
Press t_ or _ to select one of the program ((ne,
then press ENTER.
3Presst
or_toseleotthedate,thenpress
ENTER.
Set the start time, end time, channel and tape
speed as in step 3.
Notes:
• Press CANCEL to move cursor backward for correction.
• To record _'rem external source set the channel to _LI" or
"L2". "LI" or "L2" will appear next to CH 125 (or 69),
To set the timer for another program, press
or _, until the number of the second program
blinks, then press ENTER. Repeat steps 2 to 4
to set the second program.
Press both TIMER REC at the same time. The
TIMER REC indicator will light. The Timer is
programed , whe_nthe programed time is
reached, the recording is automatically
started.
_..
TJ_E_ P _EC To cancel timer recording, press both
6"¢O.-'_
"-
the buttons egain and TIMER REC
• =_.
indicator will go out.
Notes:
. The VCR section cannot be used while the TIMER REC
indicator is lit. If you want to use the VCR operation,
press both TIMER REC buttons at the same time to deactivate
the timer,
. When the clock is not set, you cannot select "TIMER REC".
in this case set the clock (see pages 20-22).
• After a power faiJere or disconnection
of the power plug,
all programmed recording setting and time display w))) be
_os! upon resumption of power,
_n this case, reset the clock
(see pages 20-22) and repmgrem any timer recordings,
• If you want to correct the digits while setting, press
the CANCEL button until the item you want to correct, then
press _ or _, to corre_ the desired setting.
• If programming
is performed without a tape in the un(t, or
with a tape without an erase prevention tab, the Timer
Recording is not possible, If a tape without an erase
prevention tab is in the unit, the tape will be ejected.
8
=
_o
431
Advertisement
Table of Contents
