Panasonic Lumix DMW-FL360 Operating Instructions Manual page 16

Checking the
Flash's Remaining
Battery Charge
e Install the batteries and then
turn on the unit and check the
battery remaining power.
1 Press the [POWER]
button.
POWER
e Charging now starts.
2 Check that the [TEST/
CHARGE] button lights.
TEST/CHARGE
e After the batteries have been
fully charged, the [TEST/
CHARGE] button lights.
16
VQT1B10
e |f it takes as long for the [TEST/
CHARGE] button to light as the
period indicated in the table
below, it means that the
batteries are nearly worn out.
Replace them with fresh
batteries as soon as possible.
PERO ME Ge
than 30s
| More
| than 10 s
Rechargeabl e nickel | |
metal hydride
batteries
MAINS IA
e 4f the (TESTICHARGE] button
and [AUTO CHECK] lamp both
flash at the same time, it means
that the batteries are almost
completely worn out and should
be replaced with fresh batteries
as soon as possible.
3 Press the [POWER]
button to turn off the
unit's power.
e When the [TEST/CHARGE]
button is pressed, the unit may
fire.
e Turn off the power in the
following situations:
e When mounting the unit onto,
or disengaging it from, the
digital camera
e When you do not want the
unit to fire
e When you are not going to
use the unit