Panasonic Lumix DMW-FL360 Operating Instructions Manual page 21

. 3 Check that the [AUTO
CHECK] lamp is flashing.
'ress the [MODE] button, and
elect the flash mode. (P19)
' The flash working range is
shown on the display panel in
line with the settings of the
digital camera.
AUTO CHECK
A
<>
> y 4
e If the [AUTO CHECK] lamp
continues to flash for about
y: Flash working range 5 seconds, it means that the unit
| Check that the distance has fired successfully. If it does
to the subject is within not flash, the unit has not fired
successfully. Check the settings
on the unit and the digital
camera and then take the
picture again.
the flash working range.
If the subject is outside the
range, adjust the aperture of the
lens or change the distance to
the subject.
The flash working range
changes depending on the type
and settings (ISO sensitivity,
aperture and focal length) of the
digital camera used.
Press the shutter button
all the way down, and
take the picture.
nd
iw
21
VQT1B10