Panasonic Lumix DMW-FL360 Operating Instructions Manual page 29

e |f the combination of the ISO
sensitivity and aperture are
?ress the [MODE] button, and outside the usable range, a
select the flash mode. (P28) warning is given in the form of
1 Press the [ZOOM] button the flashing ISO sensitivity and
to set the zoom value to aperture displays. In a case like
this, change the ISO sensitivity
and aperture.
4 Press the shutter button
all the way down, and
take the photo.
5 Check that the [AUTO
CHECK] lamp is flashing.
the focal length of the
lens.
2 Press and hold the
[MODE] button and then
turn the select dial within
2 seconds to set the ISO
sensitivity.
AUTO CHECK
A
coe
> y 4
e |f the [AUTO CHECK] lamp
continues to flash for about
5 seconds, it means that the unit
e The unit will switch to the
set it to the aperture of
the lens.
e The flash intensity can be
adjusted in 1/3 steps by varying
the ISO sensitivity and aperture
from the digital camera settings.
29
VQT1B10