Panasonic Lumix DMW-FL360 Operating Instructions Manual page 20

20
VQT1B10
discharging a pre-flash, the unit fires again for
photo taking. (P21)
[AUTO] The unit senses the light by its flash sensor in
accordance with the aperture of the lens, and it
adjusts the flash intensity. (P22)
e This mode can be used only for digital camera
models with communication functions which
support the [AUTO] mode.
[MANUAL] The unit fires at the guide number (GN)* which
has been set. (P23)
[FP TTL AUTO] This mode enables flash photo taking even at the
high shutter speeds of the digital camera by FP
nears firing (repeatedly firing the flash at high speed).
(P24)
The unit initiates FP firing at the flash intensity set
i in the [FP MANUAL] mode. (P25)
x The guide number (GN) is a value which indicates the light quantity of
a flash. The higher the value, the greater the quantity of light emitted
e You may not be able to use some modes depending on the type of
digital camera.
(O: Available, —: Not available)
MM! p EET T
Imm. AUTO], [AUTO] [MANUAL]
e |t is not possible to select a mode which cannot be used.