1. Manuals
  2. Brands
  3. Sharp Manuals
  4. Camcorder
  5. ViewcamZ VL-Z100S-S
  6. Service manual

Sharp VL-Z100S-S Service Manual

Liquid crystal display camcorder
Hide thumbs Also See for VL-Z100S-S:
Table of Contents

Advertisement

Quick Links

Download this manual
1. SPECIFICATIONS .............................................................................................................................. 2
2. PART NAMES .................................................................................................................................... 3
3. DISASSEMBLY OF THE SET ............................................................................................................ 4
4. MECHANISM ADJUSTMENT JIGS AND PARTS .............................................................................. 8
ITEMS AND INTERVALS ................................................................................................................... 9
6. ADJUSTING AND CHECKING OF MECHANISM ........................................................................... 10
7. ADJUSTMENT OF RUNNING SYSTEM .......................................................................................... 13
(DISASSEMBLING AND ASSEMBLING) ........................................................................................... 15
9. METHOD OF ADJUSTING THE ELECTRIC CIRCUIT .................................................................... 25
10.USEFUL TIPS ................................................................................................................................... 44
11.SIGNAL FLOW DIAGRAMS ............................................................................................................. 45
12.BLOCK DIAGRAMS ......................................................................................................................... 48
13.SCHEMATIC DIAGRAMS ................................................................................................................ 56
14.SEMICONDUCTOR LEAD IDENTIFICATION ............................................................................... 126
15.PRINTED WIRING BOARD ASSEMBLIES .................................................................................... 128
16.REPLACEMENT PARTS LIST ....................................................................................................... 143
17.PACKING OF THE SET ................................................................................................................. 164
SERVICE MANUAL
LIQUID CRYSTAL DISPLAY CAMCORDER
MODELS
In the interests of user-safety (Required by safety regula-
tions in some countries) the set should be restored to its
original condition and only parts identical to those specified
be used.
CONTENTS
SHARP CORPORATION
1
VL-Z100S-S/H-S/E-S
VL-Z300S-S/H-S/E-S
S64V5VL-Z100S
VL-Z100S-S
VL-Z100H-S
VL-Z100E-S
VL-Z300S-S
VL-Z300H-S
VL-Z300E-S
Page
PAL

Advertisement

Table of Contents
loading

Related Manuals for Sharp VL-Z100S-S

Summary of Contents for Sharp VL-Z100S-S

  • Page 1: Table Of Contents

    VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S SERVICE MANUAL S64V5VL-Z100S LIQUID CRYSTAL DISPLAY CAMCORDER VL-Z100S-S VL-Z100H-S VL-Z100E-S VL-Z300S-S VL-Z300H-S VL-Z300E-S MODELS In the interests of user-safety (Required by safety regula- tions in some countries) the set should be restored to its original condition and only parts identical to those specified be used.

  • Page 2: Specifications

    VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 1. SPECIFICATIONS Signal System: PAL standard Recording System: 2 rotary heads, helical scanning system Cassette: Digital VCR Mini DV video cassette Recording/Playback Time: 90 minutes (DVM60, LP mode) Tape Speed: SP mode: 18.831mm/second LP mode: 12.568 mm/second Pickup Device: "...

  • Page 3: Part Names

    VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 2. PART NAMES Front view Operation button Zoom lens DISPLAY/MODE SET button/ LCD LAMP button Monaural microphone MENU button Right view Left view Power Zoom Wide angle/ Window cleaning cover Telephoto control/ PHOTO button VOLume control DV terminal...

  • Page 4: Disassembly Of The Set

    VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 3. DISASSEMBLY OF THE SET 3-1. Procedure for disassembling the cabinet Note: Before removing the cabinet, turn OFF the power and make sure that the battery is not connected. LCD panel · Remove the screw ((s) XiPSF14P06000). · Open the LCD panel 90 degrees and remove the two screws ((x) LX- HZ0050TAFN).
  • Page 5 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S Mechanism reversion detection PWB unit Camera top cover PWB mounting angle FPC(2) Camera unit FPC(3) FPC(1) · Remove the screw ((x) LX-HZ0050TAFN), screw ((p) LX- · Remove the screw ((b) XiPSN17P03000) and remove the HZ0063TAFN) and screw ((a) XiPSN17P02000), remove the Mechanism reversion detection PWB unit.
  • Page 6 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 3-2. Procedure for disassembling the cabinet · Remove the three screws ((b) XiPSN17P03000) remove the screw ((a) XiPSN17P02000) and remove the VCR bottom cover. VCR bottom cover · Remove the two screws ((b) XiPSN17P03000) and remove the tilt cover.
  • Page 7 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S · Disconnect the six FPCs of the head amp circuit board Mechanism unit. · Remove the two screws ((a) XiPSN17P02000) and remove the head amp PWB unit. · Remove the three screws ((w) LX-BZA022WJFN) and remove the screw ((k) LX-BZA023WJFD).

  • Page 8: Mechanism Adjustment Jigs And Parts

    VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S Sketch 1. Name 4. MECHANISM ADJUSTING JIGS AND PARTS 2. Part code 3. Code 4-1. Mechanism checking and adjusting jigs <Note: Order of descriptions> * Model number and usage 1. Tension gauge 4N 1. Dial tension gauge 1. Cassette torque 1.

  • Page 9: Inspection And Maintenance Items And Intervals

    VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 5. INSPECTION AND MAINTENANCE ITEMS AND INTERVALS In order to maintain the quality of the mechanism section, perform the following maintenance and inspection. After repairing the mechanism section, perform the following maintenance regardless of the number of hours of use by the user.

  • Page 10: Adjusting And Checking Of Mechanism

    VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 6. ADJUSTING AND CHECKING OF MECHANISM The items described here are relevant to the general on-site servicing (field service). This section does not cover adjustment and replacement for which sophisticated equipment, jigs and techniques are required. In order to maintain the initial characteristics of the mechanism, it is necessary to perform maintenance and inspection and also it is essential not to damage the tape etc.
  • Page 11 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 6-4. Checking and adjusting of tension pole position during Tension pole position (Based on drum base outside shape) REC (PB) 3 to 4V DC, Cassette controller assembly not installed (Mechanism only) 0±0.3 Drum base (1) Checking T pole Check that the tension pole is located in the prescribed position as shown in Fig.4...
  • Page 12 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 6-7. Checking of loading back tension 3 to 4V DC, Cassette controller assembly not installed (Mechanism only) (1) Apply 3 to 4V DC to the loading motor and select the L start mode. (See 8-1.) (2) Move the swing arm to the S reel table side. At this time, take care not to damage the gears etc.

  • Page 13: Adjustment Of Running System

    VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 7. ADJUSTMENT OF RUNNING SYSTEM 7-1. Outline of adjustment of running system (Replacement parts) · Tu guide and arm Readjustment of height · Slide chassis · T arm Ass'y Preparations for Final adjustment Coarse adjustment adjustment of Installation of...
  • Page 14 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 7-4. Coarse adjustment of running system (Cassette controller installed) 1. Adjustment of height of Su and Tu guide rollers <Method and description> Inlet side Outlet side (1) Play back the alignment tape for running system adjustment and make adjustment so that the inlet ±1/4 shift...

  • Page 15: Assembling Of Mechanism Section And Part Replacement (Disassembling And Assembling)

    VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 8. ASSEMBLING OF MECHANISM SECTION AND PART REPLACEMENT (DISASSEMBLING AND ASSEMBLING) This section describes the method of assembling the mechanism section and the method of part replacement. For how to remove the cabinet etc., refer to "3. DISASSEMBLY OF THE SET".
  • Page 16 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S (5) PB (Record, Fast forward, Fast rewind, VSF and VSR) mode This mode is used for playback, recording, fast-forwarding, fast -rewinding, VSF and VSR. In this mode, the pinch roller is pressed against the capstan shaft and the S main brake is located away from the S reel table.
  • Page 17 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S Fig.7 Fig.8 8-3. Method of operating on the circuit board with the cassette controller assembly removed If this method is performed improperly, the tape may be damaged. Therefore do not use this method except in special cases such as measuring the VSR torque. Be sure to follow the cautions shown in this manual.
  • Page 18 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 8-4. Phase-adjust Phase-adjust the following parts. (1) Mode SW (2) Main cam (3) Sub cam (The main cam and sub cam should be also phase-adjusted for the chassis.) (4) S loading arm (5) Tu loading arm (6) Loading drive gear (main cam, sub cam, S loading gear) Note) Check the marker position carefully before disassembling.
  • Page 19 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 8-5. Assembling method 8-5-1. Method of assembling the main chassis assembly Note) For reference, numbers are prefixed to parts names to show the sequence of assembly. (For the greasing/oiling and cleaning locations, refer to the diagram of greasing/oiling locations.)
  • Page 20 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 8-5-2. Method of assembling the slide chassis assembly (8)Guide nut (6)Tu guide flange (7)Tu guide (14)Tu reel table ass'y (13)S reel table ass'y (1)Slide adjustment (2)T-SPR adjustment (6)Tu guide flange (11)T main brake (5)Guide adjustment SPR (4)Tu guide arm...
  • Page 21 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 8-5-3. Method of combining the main chassis assembly and the slide chassis assembly (1) Position the assemblies as shown in the figure below (the pole base is slightly protruded). (2) Insert the operation pins (tension arm, Tu guide arm) of the slide chassis assembly into the locations of the main chassis assembly shown in the figure below, fit the SL drive lever pin of the main chassis assembly into the groove of the slide chassis (the groove of the slide adjustment ANG), and then fix with the two screws.
  • Page 22 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 8-5-4. Diagram of greasing/oiling locations...
  • Page 23 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 8-6. Method of installing the cassette controller (2)Completed cassette controller (1)Main slide Left side view Right side view ass'y (3)Down guide Right side view Left side view B-1,2 Left side view Right side view (4)Cassette cover Right side view...
  • Page 24 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 8-7. Method of taking out the cassette with the mechanism operating singly (1) Apply 3 to 4V DC to the loading motor for slight unloading. (2) If the tape is slack, turn the rotor (mechanism backside) of the capstan motor by hand to take up the slack in the tape.

  • Page 25: Method Of Adjusting The Electric Circuit

    (NTSC pattern generator LCG-401/ · Alignment tape · Frequency counter 401YC: Manufactured by Leader) 90ADDVC-TAPE (color bar) · AC adapter · Oscilloscope VL-Z100S-S/H-S/E-S/Z300S-S/H-S/E-S Specifications of service jigs Price New/ Connection section Connector REF. No. No. of pins Parts cord Cont.
  • Page 26 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S -S Service jig configuration VL-Z100S-S/H-S/E-S/Z300S-S/H-S/E-S...
  • Page 27 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S [TEST POINT] (Wiring board diagram: Main Side A) TL3304 TL3302 TL923 TL922 L917 L916 L918 SC3301 SC3302 TL902 C974 C973 TL3310 R3321 TL913 Q908 C3321 C975 C3320 IC706 Q911 X702 R990 C980 R932 Q703 C728 R754 R749 R768...
  • Page 28 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S (Wiring board diagram: Sub Side A) TL1474 TL1475 PCO_D/A-Y ADJ PCO_D/A-C ADJ FB1480 FB1479 C2905 R2904 C2901 R2916 R2915 C2910 L601 C551 R651 R553 Q600 C627 L600 IC551 C630 C612 C574 R551 C2521 P900 C2515 C2514 C2519 R2533...
  • Page 29 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S [Execution of adjustment] Adjustment of servo and system controller 1. System code setting It is necessary to set the following data items after replacing IC705 (E PROM). <Adjusting method> Select the VCR adjustment mode and set the data value at each address.
  • Page 30 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 2. Adjustment of HSWP Mode VCR ADJ mode Adjusting 1) Select the video mode and play back the alignment tape. 2) Press "CONTINUE" → "HSWP ADJ" keys on the remote control. method → HSWP adjustment execution (When the adjustment is completed, "GOOD" is displayed on the LCD and ejecting is performed automatically.)
  • Page 31 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 3. Check of electromagnetic conversion circuit system (Auto check of playback envelope signal quality and error rate) Mode VCR adjustment mode Procedure 1) Insert a recordable tape and enter the VTR mode. 2) Press the "CONTINUE" → "TEST SEL" keys on the remote control for adjustment to enter the TEST mode.
  • Page 32 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 3. Adjustment of VF_DAC full scale (Main PWB) Measurement point TL7824(VF_G_OUT) Address VCR ADJ 59D Procedure 1) Set the data values at addresses 587 (GRYLEV)/58C (γ PEAK)/5EB (TESTSW2) and 5E6 (OSDSW) to FF/80/77 and 00, respectively. (The LED shows nothing.) 2) Set the data values at addresses 59F (CLAMP)/58D (PEDESTAL) and 5B7 (VCLK3 INV) to 00/80 and 48, respectively.
  • Page 33 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S ADJUSTMENT OF LCD CIRCUIT When making this adjustment, set the backlight switch to "Normal". (Wiring board diagram: Main Side A) C704 R1825 C1808 R1803 R4401 R1824 C1814 R1828 L1803 TL1812 D6800 C1815 R1816 C1406 C1813 C1812 R6805 C6804...
  • Page 34 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S Setting of MODEL ID Address VCR ADJ FD, FE, FF Mode VCR mode Setting rating 10, 20 Setting method 1) Using command 12, select the VCR adjustment mode. Address 2) Using command 20, enable writing to the E PROM.
  • Page 35 1. Connect with the EUI48/64 ID code control system. (1) Start the Internet Explorer or Netscape Navigator. (2) Access the following address.(URL: http://www.rcg.osa.sharp.co.jp/home/default-E.asp) Select "EUI48/64 ID code control system" among the "Service" items. Note: If you want to establish a connection by directly inputting the URL, please input the following.
  • Page 36 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S (5) Click on [Repair use]. Click (6) Input the necessary information for the application. Be sure to input the necessary input items. Select the [Group/company] and [Kind name] from the list. Input the [Model name] in half-size characters.
  • Page 37 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 9-2. Adjustment of camera section 9-2-1. Servicing of camera section (1) Camera adjustment should be performed with the set completed. (2) Subjects, measuring instruments and jigs necessary for servicing and adjustment of the camera section • Gray scale chart •...
  • Page 38 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 3) Description of remote control keys "FF" key: It is used to increase the address value and data value. "REW" key: It is used to decrease the address value and data value. "PLAY" key: It is used to confirm the selected address to call up the data. It is also used to confirm the data value.
  • Page 39 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S (4) Camera signal system adjustment mode In the camera signal system adjustment mode, the auto white balance function is stopped in order to adjust the camera. In this mode, the white balance is set to the indoor mode and focussing is performed manually.
  • Page 40 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 9-2-4. Adjusting procedure (1) Checking EEPROM Before making adjustments, check that data values are written for the corresponding addresses as shown below. If not, write the data. When performing (1) replacement of EEPROM or (2) replacement of main board, make sure to write the following data.
  • Page 41 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S Adjustment method Item (2) Adjustment of auto focus The following adjustments are performed automatically by establishing the auto focus adjustment mode and writing the following data at address "13FD" sequentially. The adjustment items are as shown in the table below. When an adjustment is completed normally, data "FF"...
  • Page 42 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S Adjustment method Item (5) Rough adjustment of iris AE 1) While shooting the gray scale normally, observe the video output using the oscilloscope. • Measurement terminal: By rewriting the data at address "0002", adjust the white luminance signal level to S terminal luminance signal output 680±10mVp-p and the gray luminance signal level (on the gray scale background) to...
  • Page 43 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S Adjustment method Item 1) Perform the adjustment of white balance repeatedly. (8) Adjustment of white balance • Measurement terminal: EE output • Address: "0090" INDOOR_W/B R "0092" INDOOR_W/B R • Measuring instrument: Vector scope • Object: Grey scale •...

  • Page 44: Useful Tips

    VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 10. USEFUL TIPS (PROBLEMS DIFFER FROM THOSE FOUND ON VHS OR 8MM DECKS BECAUSE THE SIGNALS ARE DIGITALLY PROCESSED.) Camera (EE mode) Camera (REC mode) VCR (EE mode) VCR (PB mode) Picture fails to appear when tape Picture fails...

  • Page 45: Signal Flow Diagrams

    VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 11. SIGNAL FLOW DIAGRAMS 11-1. EE MODE FLOW (VIDEO) WAVEFORM DIAGRAM (DURING COLOR BAR RECORDING) IC4401 336pin Y Output 20µs/d CH1=500mV DC P*10 CAM ADIN 370 371 373 375 377 378 380 CAM VIO ENGINE IC4401 IC4401 254pin CDY3 Output...
  • Page 46 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S WAVEFORM DIAGRAM 11-3. FLOW IN PB MODE (VIDEO) (DURING COLOR BAR PLAYBACK) HEAD AMP IC3401 5pin PBDATA Input PB_DATA IC3401 43pin Input P3301 50nSEC/d 1V/d PB_DATA IC3401 EQ/PLL 36 39 PB-CLK ADIN REC/PB ENGINE IC452 IC3401 33~36, 39~42pin Output...
  • Page 47 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 11-5. FLOW IN PB MODE (AUDIO) WAVEFORM DIAGRAM (1.6 kHz SINE WAVE) From IC3404 same as in Video PB system 10µs/d CH1=1V IC452 DC P*10 REC/PB ENGINE DODAT 16Bit ADC/DAC IC1602 AUD-R_DA_OUT AUD-L_DA_OUT IC600 AUDIO-R_IN/OUT SP(+) AUDIO-L_IN/OUT SP(-)

  • Page 48: Block Diagrams

    VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 12. BLOCK DIAGRAMS 12-1. SYSTEM BLOCK DIAGRAM...
  • Page 49 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 12-2. CAMERA SECTION BLOCK DIAGRAM...
  • Page 50 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 12-3. VIO ENGINE SECTION BLOCK DIAGRAM (VL-Z100)
  • Page 51 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 12-3. VIO ENGINE SECTION BLOCK DIAGRAM (VL-Z300)
  • Page 52 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 12-4. REC/PB SECTION BLOCK DIAGRAM...
  • Page 53 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 12-5. AUDIO/DIGITAL OUTPUT SECTION BLOCK DIAGRAM...
  • Page 54 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 12-6. CAMERA CIRCUIT BLOCK DIAGRAM...
  • Page 55 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S - M E M O -...

  • Page 56: Schematic Diagrams

    VL-Z100S-S/H-S/E-S VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z300S-S/H-S/E-S 13. SCHEMATIC DIAGRAMS 13-1. OVERALL SCHEMATIC DIAGRAM DUNTKC366QA50 DUNTKC369QA00 DUNTKC118QA01 DUNTKC364QA50(VL-Z300S-S/S-S(AS)) DUNTKC364QA51(VL-Z300S-S(RS)) DUNTKC364QA52(VL-Z300E-S/E-S(WS)) DUNTKC364QA53(VL-Z300H-S) DUNTKC364QA55(VL-Z100S-S) DUNTKC364QA56(VL-Z100S-S(RS)) DUNTKC364QA57(VL-Z100E-S/E-S(XS)) DUNTKC364QA58(VL-Z100H-S) DUNTKC368QA50(VL-Z300S-S/S-S(AS)/S-S(RS)/H-S/E-S/E-S(WS)) DUNTKC368QA51(VL-Z100S-S/S-S(RS)/H-S/E-S/E-S(XS)) DUNTKC370PM00 (VL-Z300S-S/S-S(AS)/ S-S(RS)/H-S/E-S/E-S(WS)) DUNTKC370PM01 (VL-Z100S-S/S-S(RS)/H-S/ E-S/E-S(XS)) DUNTKC371PM01...
  • Page 57 VL-Z100S-S/H-S/E-S VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z300S-S/H-S/E-S 13-2. REC/PB ENGINE SCHEMATIC DIAGRAM (VL-Z100)
  • Page 58 VL-Z100S-S/H-S/E-S VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z300S-S/H-S/E-S 13-2. REC/PB ENGINE SCHEMATIC DIAGRAM (VL-Z300)
  • Page 59 VL-Z100S-S/H-S/E-S VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z300S-S/H-S/E-S 13-3. MEC/SYS MiCON SCHEMATIC DIAGRAM...
  • Page 60 VL-Z100S-S/H-S/E-S VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z300S-S/H-S/E-S 13-4. POWER1 SCHEMATIC DIAGRAM...
  • Page 61 VL-Z100S-S/H-S/E-S VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z300S-S/H-S/E-S 13-5. CAMERA CONN SCHEMATIC DIAGRAM...
  • Page 62 VL-Z100S-S/H-S/E-S VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z300S-S/H-S/E-S 13-6. VIDEO I/O SCHEMATIC DIAGRAM (VL-Z100)
  • Page 63 VL-Z100S-S/H-S/E-S VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z300S-S/H-S/E-S 13-6. VIDEO I/O SCHEMATIC DIAGRAM (VL-Z300)
  • Page 64 VL-Z100S-S/H-S/E-S VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z300S-S/H-S/E-S 13-7. LCDIF SCHEMATIC DIAGRAM...
  • Page 65 VL-Z100S-S/H-S/E-S VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z300S-S/H-S/E-S 13-8. CONNECTION(B-B) SCHEMATIC DIAGRAM...
  • Page 66 VL-Z100S-S/H-S/E-S VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z300S-S/H-S/E-S 13-9. EQ/PLL SCHEMATIC DIAGRAM...
  • Page 67 VL-Z100S-S/H-S/E-S VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z300S-S/H-S/E-S 13-10. CAM/MiCON SCHEMATIC DIAGRAM...
  • Page 68 VL-Z100S-S/H-S/E-S VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z300S-S/H-S/E-S 13-11. CAMERA VIDEO I/O ENGINE SCHEMATIC DIAGRAM (VL-Z100)
  • Page 69 VL-Z100S-S/H-S/E-S VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z300S-S/H-S/E-S 13-11. CAMERA VIDEO I/O ENGINE SCHEMATIC DIAGRAM (VL-Z300)
  • Page 70 VL-Z100S-S/H-S/E-S VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z300S-S/H-S/E-S 13-12. DAC SCHEMATIC DIAGRAM...
  • Page 71 VL-Z100S-S/H-S/E-S VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z300S-S/H-S/E-S 13-13. VFIF SCHEMATIC DIAGRAM...
  • Page 72 VL-Z100S-S/H-S/E-S VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z300S-S/H-S/E-S 13-14. CCD SCHEMATIC DIAGRAM...
  • Page 73 VL-Z100S-S/H-S/E-S VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z300S-S/H-S/E-S 13-15. TG SCHEMATIC DIAGRAM...
  • Page 74 VL-Z100S-S/H-S/E-S VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z300S-S/H-S/E-S 13-16. CDS SCHEMATIC DIAGRAM...
  • Page 75 VL-Z100S-S/H-S/E-S VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z300S-S/H-S/E-S 13-17. LCONN SCHEMATIC DIAGRAM...
  • Page 76 VL-Z100S-S/H-S/E-S VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z300S-S/H-S/E-S 13-18. EXT DAC SCHEMATIC DIAGRAM...
  • Page 77 VL-Z100S-S/H-S/E-S VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z300S-S/H-S/E-S 13-19. LENS DRIVE SCHEMATIC DIAGRAM...
  • Page 78 VL-Z100S-S/H-S/E-S VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z300S-S/H-S/E-S 13-20. AUDIO I/O SCHEMATIC DIAGRAM (VL-Z100)
  • Page 79 VL-Z100S-S/H-S/E-S VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z300S-S/H-S/E-S 13-20. AUDIO I/O SCHEMATIC DIAGRAM (VL-Z300)
  • Page 80 VL-Z100S-S/H-S/E-S VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z300S-S/H-S/E-S 13-21. POWER2 SCHEMATIC DIAGRAM å AND SHADED COMPONENTS=SAFETY RELATED PARTS å å...
  • Page 81 VL-Z100S-S/H-S/E-S VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z300S-S/H-S/E-S 13-22. LCD SCHEMATIC DIAGRAM...
  • Page 82 VL-Z100S-S/H-S/E-S VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z300S-S/H-S/E-S 13-23. INVERTER SCHEMATIC DIAGRAM å AND SHADED COMPONENTS=SAFETY RELATED PARTS å...
  • Page 83 VL-Z100S-S/H-S/E-S VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z300S-S/H-S/E-S 13-24. HEAD AMP SCHEMATIC DIAGRAM...
  • Page 84 VL-Z100S-S/H-S/E-S VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z300S-S/H-S/E-S 13-25. MOTOR DRIVE SCHEMATIC DIAGRAM...
  • Page 85 VL-Z100S-S/H-S/E-S VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z300S-S/H-S/E-S 13-26. OPERATION SCHEMATIC DIAGRAM (VL-Z100)
  • Page 86 VL-Z100S-S/H-S/E-S VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z300S-S/H-S/E-S 13-26. OPERATION SCHEMATIC DIAGRAM (VL-Z300)
  • Page 87 VL-Z100S-S/H-S/E-S VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z300S-S/H-S/E-S 13-27. LITHIUM SCHEMATIC DIAGRAM...
  • Page 88 VL-Z100S-S/H-S/E-S VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z300S-S/H-S/E-S 13-28. VCR OPERATION SCHEMATIC DIAGRAM...
  • Page 89 VL-Z100S-S/H-S/E-S VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z300S-S/H-S/E-S 13-29. ZOOM SW SCHEMATIC DIAGRAM...
  • Page 90 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 13-30. MECHA REVERSION DETECTION SCHEMATIC DIAGRAM...
  • Page 91 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 13-31. HOLE SENSOR UNIT SCHEMATIC DIAGRAM...

  • Page 92: Semiconductor Lead Identification

    VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 14. SEMICONDUCTOR LEAD IDENTIFICATION 3LN01S XP05534 2SC4738Y KTA2014EY EMD12 XN04391 KTC4075EY 7SB3157P FMMT619 XP4501 MCH6617 2SC5376B RT1N144U XP6401 15C01M MCH6305 12A01M XP4313 XP0431N KRC401E 15C01SS XP4601 FDG312P KRC402E 2SC5536 XP6501 FDC642P KRC404E 12A01SS XP4316 CPH5504 FMG12 DAN217U 2SC4944Y...
  • Page 93 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S HVU17TRF HVC362 EX1394CE HVC375B RB160M30 HVC202A A089WJ 1SS400 MA2S304 LA74206W MB3881++ MN52A6CD AN2901FQ LA70050W H49334HN UPD16835 PCM3008 LA74212T LV4051AT IXA883WJ LC74130W MB8346BV LA73070V UPD16510 R2101S01 MM1323XV 10324AFV MM1686XC PT8146 IXA879WJ LMV358AU NJM2143R IX0809TA LB11993F NJM2535V IXA878WJ BR24L64F IXA815WJ...
  • Page 94 VL-Z100S-S/H-S/E-S VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z300S-S/H-S/E-S 15. PRINTED WIRING BOARD ASSEMBLIES MAIN PWB SIDE A TL3304 TL3302 TL923 TL922 L917 L916 L918 SC3301 SC3302 TL902 C974 C973 TL3310 TL913 R3321 Q908 C3321 C975 C3320 IC706 Q911 X702 R990 C980 R932 Q703 C728...
  • Page 95 VL-Z100S-S/H-S/E-S VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z300S-S/H-S/E-S SIDE B FDC03 P3303 R952 C923 C983 C1916 R954 R965 C966 R946 L904 L919 R960 R948 R949 TL3305 TL3306 TL3307 TL3308 TL3309 R3455 R958 R959 R953 R947 C918 R942 R941 C924 R3453 C920 R957 C919 C917...
  • Page 96 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S CCD PWB SIDE A C110 C114 C107 R106 IC101 C102 C101 R107 R108 C104 R109 C105 C111 C113 C106 C115 R101 L1051...
  • Page 97 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S SIDE B R1029 TL1017 TL1009 C1025 TL1025 TL1028 TL1031 TL1011 TL1007 TL1006 TL1005 TL1021 TL1023 SC1001 TL1022 TL1020 TL1024 TL1026 TL1019 TL1016 TL1010 TL1008 R110 R1030 R1028 TL1030 TL1014 TL1002 TL1004 TL1001 TL1012 TL1003 TL14 TL13 TL12 TL11...
  • Page 98 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S SIDE A SUB PWB FB1480 FB1479 C2905 R2904 C2901 R2916 R2915 C2910 L601 C551 R651 R553 Q600 C627 L600 IC551 C630 C612 C574 R551 P900 C2521 C2515 C2514 C2519 R2533 R2528 IC2502 R2526 R2527 R2523 R2520 C2516...
  • Page 99 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S SIDE B R2561 P3602 Q552 C618 C622 C620 C624 C651 R627 R634 C629 R635 R638 C635 R601 C605 C631 C636 R641 Q632 R642 R643 C642 D2904 Q2903 Q2906 R2913 R2911 R2919 R572 C575 R573 P2901...
  • Page 100 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S LCD PWB SIDE A SC803 T9800 R9801 C9804 Q9800 C9801 C9806 R9800 R9811 C9807 R9812 R9805 Q9801 R9806 D9800 R825 D800 R826 R827 C817 C818 C807 SC802 R819...
  • Page 101 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S HEAD AMP PWB SIDE A SIDE B P301 TL1714 TL1713 TL333 T L308 TL309 C323 TL1712 TL1711 TL1710 TL1709 TL1708 TL370 R314 TL369 R303 TL368 C318 C306 C325 TL327 R320 TL326 C321 IC301 TL324 C320 C303 TL323 R305...
  • Page 102 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S OPERATION PWB SIDE A SIDE B...
  • Page 103 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S LITHIUM PWB SIDE A C5804 J5800 SIDE B C5802 TL5806 C5803 R5807 R5804 R5801 R5808 TL5813 C5800 TL5812 TL5810 TL5801 TL5811 TL5818 SC5800 TL5814 TL5800...
  • Page 104 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S MECHA REVERSION DETECTION PWB SIDE A SIDE B TL2302 SW2300 TL2301...
  • Page 105 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VCR OPERATION PWB SIDE A SIDE B TL2103 TL2104 TL2106 TL2102 TL2101 SW2104 TL2110 TL2105 SW2105 TL2107 TL2109 TL2108 SW2102...
  • Page 106 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S ZOOM SW PWB SIDE A SIDE B SW2201 VR2201 C2201 C2202 TL2205 TL2204 TL2202 TL2201 TL2203 P2201...

  • Page 107: Printed Wiring Board Assemblies

    VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S 16. REPLACEMENT PARTS LIST/ Ref. No. Part No. Description Code Ref. No. Part No. Description Code EXPLODED VIEWS DUNTKC364QA50(VL-Z300S-S/S-S(AS)) DUNTKC364QA51(VL-Z300S-S(RS)) DUNTKC364QA52(VL-Z300E-S/E-S(WS)) ELECTRICAL PARTS LIST DUNTKC364QA53(VL-Z300H-S) DUNTKC364QA55(VL-Z100S-S) Parts marked with " å " are important for maintaining the safety of the DUNTKC364QA56(VL-Z100S-S(RS)) set.
  • Page 108 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S Ref. No. Part No. Description Code Ref. No. Part No. Description Code X4451 RCRSCA048WJZZY Crystal, CRSCA048WJ Q1405 VS2SC5376B+-1Y 2SC5376B+ (Z300S-S/S-S(AS)/S-S(RS)/H-S/ COILS E-S/E-S(WS)) Q1431 VSXP0431N++-1Y XP0431N++ FL403 RFiLC0164TAZZY Filter (Z300S-S/S-S(AS)/S-S(RS)/H-S/ (Z300S-S/S-S(AS)/S-S(RS)/H-S/ E-S/E-S(WS)) E-S/E-S(WS)) Q1432 VSKTX101UY+-1Y KTX101UY+ L403 VPCEM4R7MR40NY Peaking, 4.7µH...
  • Page 109 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S Ref. No. Part No. Description Code Ref. No. Part No. Description Code C914 VCCCCZ1HH101JY 100p 50V Ceramic C420 VCKYCZ1EB103KY 0.01 25V Ceramic C915 VCKYCY1AB224KY 0.22 10V Ceramic C421 VCKYCZ1EB103KY 0.01 25V Ceramic C916 VCKYCZ1HB102KY 1000p 50V Ceramic C423 VCKYCZ1EB103KY 0.01...
  • Page 110 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S Ref. No. Part No. Description Code Ref. No. Part No. Description Code C1435 VCKYCZ1EB103KY 0.01 25V Ceramic C3706 VCKYCZ1EB103KY 0.01 25V Ceramic (Z300S-S/S-S(AS)/S-S(RS)/H-S/ C3707 VCKYCZ1EB103KY 0.01 25V Ceramic E-S/E-S(WS)) C3708 VCKYCZ1EB103KY 0.01 25V Ceramic C1436 VCCCCZ1HH150JY 50V Ceramic...
  • Page 111 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S Ref. No. Part No. Description Code Ref. No. Part No. Description Code C7404 VCKYCZ1EB472KY 4700p 25V Ceramic R443 VRS-CZ1JF105JY 1/16W Metal Oxide C7413 VCKYCZ1HB221KY 220p 50V Ceramic (Z300S-S/S-S(AS)/S-S(RS)/H-S/ C7414 VCCCCZ1HH330JY 50V Ceramic E-S/E-S(WS)) C7417 VCKYCY0JB105KY 6.3V Ceramic R462...
  • Page 112 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S Ref. No. Part No. Description Code Ref. No. Part No. Description Code R772 VRS-CZ1JF474JY 470k 1/16W Metal Oxide R1423 VRS-CZ1JF103JY 10k 1/16W Metal Oxide R779 VRS-CZ1JF000JY 1/16W Metal Oxide (Z300S-S/S-S(AS)/S-S(RS)/H-S/ R782 VRS-CZ1JF104JY 100k 1/16W Metal Oxide E-S/E-S(WS)) R902 VRS-CZ1JF562JY 5.6k 1/16W Metal Oxide...
  • Page 113 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S Ref. No. Part No. Description Code Ref. No. Part No. Description Code R1815 VRS-CZ1JF103JY 10k 1/16W Metal Oxide R3722 VRS-CZ1JF682JY 6.8k 1/16W Metal Oxide R1816 VRS-CZ1JF221JY 220 1/16W Metal Oxide R3723 VRS-CZ1JF102JY 1/16W Metal Oxide R1817 VRS-CZ1JF000JY 1/16W Metal Oxide...
  • Page 114 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S Ref. No. Part No. Description Code Ref. No. Part No. Description Code BALUNES R6820 VRS-CZ1JF000JY 1/16W Metal Oxide R6832 VRS-CZ1JF333JY 33k 1/16W Metal Oxide FB201 RBLN-0102TAZZY Balun, BLN-0102TA R6833 VRS-CZ1JF334JY 330k 1/16W Metal Oxide FB415 RBLN-0257TAZZY Balun, BLN-0257TA...
  • Page 115 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S Ref. No. Part No. Description Code Ref. No. Part No. Description Code C107 VCKYTV1CB105KY 16V Ceramic C524 VCKYCZ1HB102KY 1000p 50V Ceramic C108 VCKYCY0JB105KY 6.3V Ceramic C525 VCKYCZ1HB102KY 1000p 50V Ceramic C109 VCSATA0YJ156MY 6.3V Tantalum C551 RC-KZ0075TAZZY 16V Ceramic...
  • Page 116 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S Ref. No. Part No. Description Code Ref. No. Part No. Description Code R631 VRS-CZ1JF000JY 1/16W Metal Oxide P3602 QPLGN0474TAZZY Plug, 4Pin R632 VRS-CZ1JF683JY 68k 1/16W Metal Oxide P2901 QCNCM8058TAZZY Connector, 80Pin R633 VRS-CZ1JF393JY 39k 1/16W Metal Oxide SC501...
  • Page 117 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKC369QA00 RESISTORS HEAD AMP PWB UNIT R302 VRS-CZ1JF183JY 18k 1/16W Metal Oxide R303 VRS-CZ1JF822JY 8.2k 1/16W Metal Oxide R304 VRS-CZ1JF222JY 2.2k 1/16W Metal Oxide INTEGRATED CIRCUITS...
  • Page 118 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKC370PM00(VL-Z300S-S/S-S(AS)/S-S(RS)/H-S/E-S/ DUNTKC373PM02 E-S(WS)) VCR OPERATION PWB UNIT DUNTKC370PM01(VL-Z100S-S/S-S(RS)/H-S/E-S/E-S(XS)) OPERATION PWB UNIT DIODES AND LED’S LED2101RH-PXA038WJZZY PhotoDI, ODE LED2102RH-PXA037WJZZY PhotoDI, ODE CAPACITORS C2001 VCKYCZ1HB102KY 1000p 50V Ceramic...
  • Page 119 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S Ref. No. Part No. Description Code Ref. No. Part No. Description Code MECHANISM PARTS XWHJZ21-02040 W ø 2.1 ø 4.0t0.25 MSPRCA037WJFJ TP Adjustment Spring PGiDSA004WJFW TP Bottom Flange CCHSMA013WJ02 Mecha Chassis Service PGiDPA002WJFW T Post LCHSMA013WJZZ Main Chassis Ass'y...
  • Page 120 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S Ref. No. Part No. Description Code Ref. No. Part No. Description Code 10-2-2 HDECPA014WJSA LCD Decoration Plate CABINET PARTS LIST (Z100S-S/S-S(RS)/H-S/E-S/ E-S(XS)) GCOVHA035WJKA Adjusting Cover 10-2-3 PSHEPA099WJZZ LCD Cabinet Attachment GCABAA246WJKG Camera R Cabinet (KS Attachment) LANGKA120WJFW PWB Mounting Angle...
  • Page 121 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S Ref. No. Part No. Description Code Ref. No. Part No. Description Code VHiEW6671++-1Y Hole Sensor 105-6 JBTN-A134WJSC Standby Button TLABZA490WJZZ Feature Label 105-7 JKNBPA015WJSC Power Knob (Z100S-S/S-S(RS)/H-S/E-S/ 105-8 MSPRCA023WJFJ Spring E-S(XS)) GCOVAA607WJKH VCR Front Cover TLABZA552WJZZ Feature Label DUNTKC372PM00 Mecha Reversion Detection —...
  • Page 122 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S Ref. No. Part No. Description Code Ref. No. Part No. Description Code PACKING PARTS SUPPLIED ACCESSORIES (NOT REPLACEMENT ITEM) GCOVHA002WJZZ Lens Cap UBATiA014WJZZ Battery Pack SPAKAA097WJZZ Packing Add.(Bottom) — UBATLA001WJZZ Lithium Battery(CR1216) SPAKCB200WJZZ Packing Case — å UADP-A053WJZZ...
  • Page 123 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S MECHANISM CHASSIS EXPLODED VIEW...
  • Page 124 VL-Z100S-S/H-S/E-S VL-SD20U VL-Z300S-S/H-S/E-S CABINET EXPLODED VIEW 8-14 8-11 10-2-2 8-13 10-2 8-12 8-19 8-10 10-2-3 8-18 8-17 10-17 10-17 10-3-1 10-16 10-3-4 10-6 10-3-5 10-3-3 10-3-2 10-14 10-10 3-11 10-4 3-10 10-9 10-13 3-12 10-12 10-11 9-1-2 10-1-2 5-10 10-1-1...
  • Page 125 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S CABINET MECHANISM EXPLODED VIEW 101-6 101-3 101-5 101-4 101-8 101-2 101-9 103-3 101-12 101-1 103-7 103-6 103-2 101-11 103-4 101-13 101-10 101-7 105-5 105-7 105-2 105-3 105-6 105-8 105-8 105-4...
  • Page 126 VL-Z100S-S/H-S/E-S VL-SD20U VL-Z300S-S/H-S/E-S CASSETTE CONTROL EXPLOOD VIEW LENS UNIT EXPLOOD VIEW...
  • Page 127 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S VL-Z100S-S/H-S/E-S/Z300S-S/H-S/E-S SERVICE JIG SPECIFICATIONS 1-1. Adjusting jigs for checking the mechanism Name New part Type number, Application Part code Code Cassette torque meter for PB 1mN·m/1.5mN·m 9DASD-1015 Torque gauge For measurement of VS-REW winding torque. JiGTG0045 Torque gauge head For torque gauge shown left.

  • Page 128: Packing Of The Set

    VL-Z100S-S/H-S/E-S VL-SD20U VL-Z300S-S/H-S/E-S 17. PACKING OF THE SET Z100H-S/ Z100E-S(XS) Z300H-S/E-S(WS) No.1 No.1 Z100S-S/S-S(RS)/E-S/ No.1 Z300S-S/S-S(RS)/E-S VL-Z100H/E/Z300H/E VL-Z100S/Z300S No.8, No.9, No.12, No.14 No.1 No.9, No.10, No.11, No.12, No.13, No.14 No.1 No.6 No.3 No.5 No.23 No.7 No.2 No.4 No.23 No.21 No.20 No.20...
  • Page 129 VL-Z100S-S/H-S/E-S VL-Z300S-S/H-S/E-S...
  • Page 130 VL-Z100S-S/H-S/E-S VL-SD20U VL-Z300S-S/H-S/E-S COPYRIGHT © 2004 BY SHARP CORPORATION ALL RIGHTS RESERVED. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.

This manual is also suitable for:

Vl-z100h-sVl-z100e-sVl-z300s-sVl-z300h-sVl-z300e-s

Table of Contents