Fujitsu DYNAMO 640SE User Manual page 4

[ma] Connecting your DynaMO Hardware
1 |: Make sure that a SCSI host adapter is installed in your computer
2
Turn off your computer
3: Connect SCSI cable to "SCSI Out"
YOU MAY NEED THE
PROVIDED 25:50
PIN CONVERTER TO
CONNECT TO YOUR
HOST ADAPTER.
i If you have other SCSI devices attached to your host adapter it may be
i necessary to change the SCSI ID or DIP switches on your DynaMO. MacOS
! users will need to change DIP switch setting to Macintosh mode SEE PAGE 6
4 ! Connect AC adapter
POWER ON
SWITCH
1 CONNECTING HARDWARE