Fujitsu DYNAMO 640SE User Manual page 5

installing your DynaMO Software
1 Turn on the DynaMO 640SE (green power indicator light
will be lit).
Turn on computer and close all applications.
3 Insert the DynaMO CD into your CD-ROM drive, and click on
the CD-ROM icon.
4 Select the appropriate folder for your operating system and click
on "setup.exe" to install the software.
Follow the instructions to install your software.
Remove the CD and reboot the computer.
MacOS Users. The DynaMO CD does not contain Macintosh device drivers
or a Macintosh MO disk formatter. Please refer to the set-up instructions
in the "Disk Drive Tune Up" packet.
DynaMO Companion Software CD
The DynaMO Companion Software CD contains a variety of useful
applications to further enhance your DynaMO experience.
You are responsible for the installation, management and operation
of these applications. Fujitsu Computer Products of America makes
no representations or warranties for the software included on the CD.
All warranties, representations or support are provided by third parties
and are described in the end user license agreement(s) included on
the CD.
INSTALLING SOFTWARE 2