Busy Indicator; Emergency Eject - Fujitsu DYNAMO 640SE User Manual

Using your MO Disks
BUSY INDICATOR
EMERGENCY EJECT
Inserting a MO Disk
Gently insert the MO disk with the label side up, as shown above, until
the disk clicks into place. Never force the disk into the drive or insert
the MO disk upside down as this may damage the drive.
Ejecting a MO Disk
MANUAL EJECT
Click the removable disk icon Press the eject button of the
with the right mouse button DynaMO 640SE.
and select "Eject" from the
pull-down menu.
Drag and drop the MO disk
drive icon into the trash can.
Warning: Never eject the MO disk while the busy indicator light is on. Damage
to, or loss of, data may result.
Emergency Eject
If the MO disk cannot be ejected as described above, or appears to be
jammed in the drive, the disk can be ejected using Emergency Eject.
1. Turn off the DynaMO 640SE and wait for 30 seconds or more
before ejecting the MO disk.
2. Straighten one end of a large paper clip.
3. Insert the straightened end of the paper clip into the hole just
below the shutter door, and push gently but firmly until the MO
disk is ejected.
Since a floppy disk is about the same size as a MO disk, be careful to
never insert a floppy disk into your DynaMO. Never insert foreign objects
into the drive.
USING DYNAMO 4