Sony BRAVIA KDS-50A3000 Operating Instructions Manual page 12

[]
DIGITAL OUT
Connects to the optical audio input of your digital audio equipment that is PCM/Dolby
(OPTICAL)
Digital compatible. Dolby Digital Audio signal from the HDMI input will be output as
PCM.
[] AUDIO OUT Connects to the left and right audio input jacks of your analog audio equipment. You can
(VAR/FIX) use these outpnts to listen to your TV's audio through your stereo system.
[] COMPONENT IN Connects to your equipment's component video (YPI_PIO output jack and audio (L/R)
1/2 (1080p/1080i/ jacks. Component video provides better picture quality than the S VIDEO ([2_) or the
720p/480p/480i)/ composite video ([_) connection.
L-AUDIO-R
• Component video (YPBPI_) connection is necessary to "dew 480i, 480p, 720p, 1080i and
1080p formats. Note that this TV displays all video input signals in a resolution of
1,920 dots x 1,080 lines.
Connects to a personal computer's video output connector using an HDI 5-HDI 5 cable
with ferrite core (analog RGB, not supplied). Can also be connected to other analog RGB
equipment.
See "PC Input Signal Reference Chart" on page 15 for the signals that can be displayed.
• For some Apple Macintosh computers, it may be necessary to use an adapter (not
supplied). If this is the case, connect the adapter to the computer before connecting the
HDI5-HDI5 cable with ferrite core.
• If the picture is noisy, flickering or not clear, a@]st Phase and Pitch of Screen
settings on page 36.
HDMI (High-Defnition Multimedia Interface) provides an nncompressed, all-digital
audio/video interface between this TV and any HDMI-eqnipped audio/video equipment,
such as a set-top box, DVD player, Bln-ray Disc Player, A/V receiver as well as PC.
HDM] supports enhanced, or high-definition video, plns digital audio.
If the eqnipment has a DVI jack and not an HDMI jack, connect the DVI jack to the
HDMI IN 1 (with DVI-to-HDMI cable or adapter) jack, and connect the audio jack to the
AUDIO IN (L/R) jacks of HDMI IN 1.
[] PC IN
(RGB/AUDIO)
[] HDMI IN 1
HDMI/
R-AUDIO-L
[] HDMIIN 2/3
HDMI
[] DMeX/SERVICE
DVI-to-HDMI cable
Audio cable
DVI-to-HDMI adapter
• HDM] connection is necessary to view 480i, 480p, 720p, 1080i, 1080p and 1080/2@
formats. Note that this TV displays all video input signals in a resolution of 1,920 clots x
1,080 lines.
• Be sure to nse only an HDMI cable that bears the HDMI logo.
• When HDMI control compatible equipment is connected, communication with the
connected equipment is supported. Refer to page 43 to set up this comnmnication.
• When connecting an HDMI control compatible audio system with HDM] jack, be sure
to also connect to the OPTICAL OUT jack.
This USB port is for service only nnless you are connecting the optional BRAVIA
external module (DMeX).
12