Sony BRAVIA KDS-50A3000 Operating Instructions Manual page 45

6
Pull the lamp out of the TV.
Hold the indented grooves as shown in the
illustration, and pull the lamp straight out. If
the lamp is hard to remove, pull the right side
of the lamp for additional traction.
Hold this part of the lamp
Reattach the lamp door
Replace the door by inserting the two tabs in
the slot from the left side. Slide the level to
the right and then turn the screw clockwise to
secure the door
• The lamp is very hot immediately after use. Do not
touch the inside of the lamp compartment, the glass
portion of the lamp, or the surrounding parts.
• After the used lamp has cooled, place it into the empty
box of the replacement lamp. Never put the used lamp
into a plastic bag.
7 Slide the new lamp into its place.
Insert the new lamp by pressing the two parts
firmly into place
as shown in the illusnation.
Make sure the
lamp is securely
mounted into
the compartment.
Failure to do so may cause a
fire or the screen to go dark.
• If the lamp is not securely reattached, the sell'-
diagnostic function may be triggered and the POWER
LED blinks six times (see page 24).
9 Put the outside lamp cover back in its place.
Replace the cover, inserting it flom the right
side. Press the clamp on the left side to secure
the cover.
10 Plug in the power cord. Turn on the TV and
set the Lamp Replacement
option in the
General
settings (see page 43). This setting
is
necessary to inform you when the next
lamp
replacement
is needed.
• Until you set the Lamp Replacement option, a
message announcing that the lamp is at the end of its
life will appear every time you turn on the TV.
• Consult your Sony dealer for a Sony XL-5200
replacement lamp.
• Take great care when replacing the lamp or plugging
in/unplugging the connecting cords. Rough handling
may canse the TV to fall, damaging the TV, the TV
stand and the floor.
0
o
(Continued)
45