Sony BRAVIA KDS-50A3000 Operating Instructions Manual page 15

Use the TV as a monitor for your PC,
Shown below with the HDI5 to HDI 5 connection, This TV can also be connected to a PC with DVI or
HDMI output, (Refer to the separate Quick Setup Guide,)
Side of TV
HD15-HD15 ?
cable (analog
RGB)
l
Connect to an HDMI compatible
L P;uWi_hc_lH DM I cable.
J (stereo mini plugs)
• Connect the PC IN jack to the PC using an HDI 5-
HDI5 cable v,,ith ferrite core (analog RGB, not
supplied) and audio cable (page 12).
PC Input Signal Reference Chart
Ariel connecting the PC to the TV. set the output signal trom the PC according to the chart below.
o,.
VGA 640 x 480 31.5 60 VGA
640 x 480 37.5 75 VESA
720 x 400 31.5 70 VGA-T
SVGA 800 x 600 37.9 60 VESA Guidelines
800 x 600 46,9 75 VESA
XGA 1024 x 768 48.4 60 VESA Guidelines
1024 x 768 56,5 70 VESA
1024 x 768 60,0 75 VESA
WXGA 1280
x
768 47.4
60
VESA
1280
x
768 47.8 60 VESA
1280
x
768 60,3 75
1360 x 768 47.7 60 VESA
SXGA 1280 x 1024 64.0 60 VESA
1280 x 1024 80,0 75 VESA
HDTV 1920 x 1080 67,5 60
• This TV's PC input does not support Sync on Green or
Composite Sync.
• This TV's PC VGA input does not support interlaced
signals.
• When in PC input, the edge of the picture may be
cropped, or a black frame may appear around the
picture. See page 22 to adjust the screen.
• For the best picture quality, it is recommended to use
the signals (boldfaced) in the above chart with a 60 Hz
vertical frequency from a personal computer. In plug
and play, signals with a 60 Hz vertical frequency will be
detected automatically. (PC reboot may be necessary.)
15