Sony BRAVIA KDS-50A3000 Operating Instructions Manual page 25

Programming the Remote
Control
Press @ while the FUNCTION button is lit.
The selected FUNCTION button will blink
twice if your equipment is programmed
correctly and five times if it is not.
To Confirm the Programming
If you can turn on and offthe equipment by
pressing the green _ button, then the
programming is complete. If not, try the next code
listed.
• In some cases, you may not be able to program your _"
remote control. If this is the case, use your equipment's "'t
own remote control.
• Ally one of the
FUNCTION
buttons can be
programlned to operate other equipment regardless of
the labeling. For example, if programmed with the
correct code, EEl can operate DVD/VCR combo
equipment. This is useful if your equipment does not
match the labeled buttons available. Make note of your
equipment's programmed button.
• You may prograln one equipment per FUNCTION
button.
The remote control is preset as indicated below so
that you do not need to program the remote
control.
SO nY Eq _ip _ _ Pro _ ramm_ bl _:Co _ _:Nu
B1) 101 (Sony Bin-ray Disc Player)
DVD 751 (Sony DVD Player)
STB 801 (Sony Satellite Receiver)
Follow the steps below to program your TV's
remote control.
1 In the space provided below, write down the
three-digit code of your equipment found on
the Manufacturer's Codes List on page 26.
If more than one code is listed, try entering
the code listed first.
2
3
Code No.
Press and hold 12Zl, _l or _EE3and
simultaneously
to light the FUNCTION
button.
Enter the three-digit code using @-@ while
the selected button is lit. If the code is not
entered within 10 seconds, you must repeat
step 2.
(Continued)
25