Attachment Assembly - Silvercrest SRB 6 A1 384456 2107 Operating Instructions And Safety Instructions

3. Remove the old batteries
4. Insert new batteries
holder
Fig. 3
5. Slide the battery holder
arrow on the battery holder
(see Fig. 5).
Fig. 5
6. Place the battery compartment cap
it onto the hand unit
and secure (see Fig. 1).

Attachment assembly

WARNING - RISK OF INJURY!
► Only change the attachments
switched off.
♦ There are four different attachments
from. Choose the most suitable attachment
task:
Large brush attachment
The large brush attachment
floors and walls.
■ 6 │ GB │ IE
5
(if there are any) from the battery holder
5
as shown in the polarity diagram in the battery
3
(see Fig. 3 and 4).
−
+
−
+
−
+
3
back into the hand unit
3
1
until the battery compartment cap
9
Fig. 4
1
is facing towards the top side of the appliance
4
back onto the hand unit
9 8 7 6
/ / / when the appliance is
9 8 7 6
/ / /
9 8
/ /
is ideal for cleaning large flat areas, such as
3
.
. Make sure that the
1
and push
4
is sitting tight
available to choose
7 6
/ according to the
SRB 6 A1