Panasonic SA-AK66 Service Manual page 12

SA-AK66
CN303 Step 12 Connect back the wire to CN302, CN303 and CN304.
Use the extension wire (REXX0261) to connect to CN502. Use
a FFC wire (REEX0137) to connect CN1 to CN309.
Extension sable REXX0261 CN302
Meo ee: Panel P.C.B.
Transformer P.C.B./ |
/ CN309
FFC wire REEX0137
CN304
| Deck P.C.B.
CN
8.2. Main Component Replacement Procedures
1. Replacement of the Traverse Deck Servo PC.B
Step 1 Follow the procedures in 'Disassembly of the Traverse Traverse Deck
Unit' ( Step 1 - Step 4 ) |
Flexible cable
f,
2
Flexible cable
Step 3 Desolder the 4 legs of the 2 motors and pull out the Step 5 Remove the flexible cable CN 701.
Servo P.C.B.
Step 4 Widen the 3b ith a fl dri rT - Removal of the flexible cable. Push the top of the connector
rep : er MIG: 2 Dosses WIN enlisk core Wenver ane BulOur in the direction of the arrow 1, and then pull out the flexible
the 3 pins. Then remove the Traverse Deck. Sable in thesditectlon oF ho=nrowe:
Note:
Insert a short pin into the flexible cable for traverse unit.
12