Con Circuit Board, Electronic - Hitachi DIGITAL 8 VM-D965LE Service Manual

m@ CON Circuit Board (A)
(1) Disconnect 3 connectors on the CON circuit board.
(2) Remove 5 screws holding the CON circuit board.
m@ Electronic Viewfinder (EVF) Assembly (B)
(3) Remove 3 screws holding the EVF Assembly.
m@ Speaker (C)
(4) Remove 2 screws holding the SP bracket (F) and speaker.
m@ Fulcrum (D) and L-Case (E)
(5) Remove 2 screws holding the fulcrum.
Reinstallation procedure and caution:
* When reinstalling the CON circuit board, EVF assembly, speaker and fulcrum, lay out each cable as shown in Fig. 2-5-2.
: CON Circuit Board
: EVF Assembly
: Speaker
: SP Bracket
IMGOR>
A Cc
Fig. 2-5-2
a
8
eS
es
EF2-5