Sharp BE-2520 Service Manual page 3

BE=2520
@ Used for cancellation of the LIST mode:
Message is printed in this case. _
. CLEAR key
YES
|
; | = LIST mode?
LIST mode clear
LIST mode clear
message print
2) (DEPOSIT, (CASHIN), [CASHOUT], [CAST CHECK)
[MISC1], [MISC2], [MISC3], and [MISC4].
(Standard 8 items summary) Validation function keys
When any of these validation function keys is depressed
after entering data by the numeric keys, the data is
stored in the specific grand totalizer-and printed on the
slip. The data is further added to the batch totalizer
only when this is designated by presetting in advance.
The consecutive number is counted up as a result of the
depression of any of these (function) keys: However,
this is determined by the presetting done in advance.
During resetting (Z mode), the net total is printed with a
"4 "_" or with a "'non-add" symbol! (specified by the
presetting).:
(CASH IN TOTAL) — (CASH-OUT TOTAL) —
'CHECK TOTAL) = NET TOTAL
For functions programmed for auto check function
"Yes," registered data are sequentially stored in the auto
check buffer.
Storing registration data in the auto check buffer is
possible up to lock out point which may be peor at the
Initial presetting.
(CASH
The balance memory is updated by the data registered
in the LIST mode, according to "+, ""—'', or "NON-
ADD" sign given to that validation function key at the
time of initialization.
(4) [DUP] (Duplicate: key,
@ When the duplicate key is pushed oe ipialy after any
- of the function keys (DEPOSIT, CASH-IN, etc.) has
been used, the identical contents of the transaction can
be printed on a slip.
(5) (ACCT. #] Lacan: rethaber kei
@ Used as an account number°key. Depression of the key
displays "Hon the 13th digit of the display and the
data on display at that time are then printed -on the
journal.
Number entry' 6f account uwnibee is up to 11-digits
maximum. ,
Memory is not affected by the use of this key. :
If the machine is programmed for compulsive depression
of the [ACCT] # key by the initial setting, it does not
allow any registration before this key' is pressed. (REG
mode alone)
The conditional requirement for the: depression of the
key is cleared after a validation key depres-
sion,
key depression, or mode
switch changeover.
For setting teller number (in "PGM'"' mode).
For setting one-cycle or double-cycle printing in preset
"mode.
Inputting characters (symbols) that identify customer
ID in preset mode.
To read all preset programmed conditions {in 'Z" mode).
Used to set the print format. (Z mode) 7
Used to display the date and time. (BTL mode}
(6) [+], [=] (Pius, minus keys)
Used to carry out addition and/or subtraction after a
numerical input, the result 'of which will be stored in-
the buffer memory.
The numerical data, input by either. of these keys, will
by printed on the journal paper with either a plus or
minus sign. The same data will also appear on the dis-
play.
The 'results of the ealadletions will be cleared by
depression of [TOTAL] key.
When. the.results are to be registered by a validation
funétion key. The [REP] key is used together with the
or [TOTAL] key. in the following manner:
id + validation function key.
[FOTAL > > REP) > validation function key.
The results of the calculations are also cleared when the
mode switch is changed. © '
Zero or negative result can be registered by the use of
the [SUB TOTAL], [TOTAL], or [REP] key.
(7) [SUB TOTAL] key
®@ When the SUB TOTAL key is depressed (after operation
of the plus/minus keys), the resulting information. will
be printed and displayed but not cleared.