Airflow Adroit DV96 (R) Maintenance Manual

MVHR (Mechanical Ventilation with Heat Recovery) units require regular filter maintenance (cleaning or
replacement). The Airflow MVHR units have been designed to facilitate convenient access to the filters with easy
maintenance in mind. The Airflow filters are tested and compliant with ISO 16890.
This filter replacement guide is specific for the following products (it also applies to the EPH unit versions):
Filter replacement indication
The safety switch automatically turns off the power when the upper door of the unit is opened
Always disconnect the power plug before starting the ventilation unit maintenance. The maintenance reminder
indicates filter replacement with a pop-up window.
To acknowledge the maintenance reminder message, press the tick button.
Press the back button to postpone the reminder for one week.
When the maintenance reminder is activated, check the cleanliness of the filters and replace them if required.
The Adroit ventilation unit has three air filters:
2 x ISO Coarse > 75% (G4) - complies to ISO 16890, coarse filter; filters insects, heavy pollen and other relatively
large foreign objects out of the outdoor air (A).
1 x ISO ePM1 50% (F7) filters - complies to ISO 16890 fine filter; filters microscopic pollen and dust particles out of
the supply air (B).
The coarse filter; filters the extract air and keeps the heat recovery cell clean (C).
The filter replacement interval depends on the ambient particle concentration. It is recommended that the filters are
replaced every spring and autumn or at the very least once a year.
Adroit DV96-DV110-DV145 Units
Filter Maintenance Guide
Product no Description
90001265 DV96 (R) Adroit with integral CO
90001266 DV96 (L) Adroit with integral CO
90001267 DV110 (R) Adroit with integral CO
90001268 DV110 (L) Adroit with integral CO
90001269 DV145 (R) Adroit with integral CO
90001270 DV145 (L) Adroit with integral CO
sensor
2
sensor
2
sensor
2
sensor
2
sensor
2
sensor
2
Page 1/2