Mitsubishi Electric unisen 154 Series Basic Owner's Manual page 22

22 3. TV Features
Positioning the TV
The TV's built=in speaker array can be set up to reflect
sound off the room walls to create a surround sound effect.
Center the seating area in front of the TV and at
meast six feet away,
Arrangements that give good resumts:
Enter the room dimensions and layout information
requested in the screen. To change measurements,
press A Y or enter numbers using the remote con-
trol's keypad.
mfthe room is an odd shape, mocate the TV to
take best advantage of wall reflections°
Avoid mocations that may distort sound reflec-
tionso
3, Press EXiTto exit and save settings.
4, Play some sampBe audio to check sound quality.
Rffurther adjustment is needed, use the Custom
menu as described next.
Custom Menu
use the Custom menu after defining the room layout.
1, From the Sound > SoundPro menu go to the
CUSTOM menu.
Connecting the TV
To hear digital surround sound, the TV must be con-
nected to a digitaB surround sound source. The sur=
round sound source can be on an HDMR input or the
ANT input (for some digitaB broadcasts). Other stereo
connections will provide DoBby Pro Logic surround
sound.
Position yourself in your usual viewing location.
Remain in this position, looking at the TV, while
making the following adjustments.
Manual Setup
Manual setup is available for aft models.
Note: If you have already performed Auto setup, any
manual adjustments will erase all settings cre=
ated during Auto setup.
1, Press MENUand go to Sound > SoundPro.
For assistance ca((1(800) 332-2119
Controls in the SoundPro > Custom menu adjust the
TV's sound output,