Table of Contents
Advertisement
Pressing the Clear button will reset the
microprocessor.
Press the Clear button in
the following cases:
¢
When using the unit for the first time
after connecting It.
«
When there is a misoperation.
e
When the display indicates a
misoperation.
Press the Clear button with the tip of a pen,
etc. (Fig. 12)
Clear button
Fig. 12
Parts Identification
Fig. 1
[3]
Display
[11] Spectrum analyzer display selector
button
Fig. 2
[13] Operation display
Each time button [11] is pressed, the
operation display [13] changes in the
sequence from 1, 2, 3, 4, 5 then 6.
MODE 1
This indicates the music energy level of
each frequency by the height of the bar for
each band, while also showing a
temporary indication of level peaks.
MODE 2
This indicates the music energy level of
each frequency by width.
MODE 3
This indicates the music energy level of
each frequency by the height of the bar for
each band.
MODE 4
The sound intensity is displayed in a radial
shape.
MODE 5
This displays an image giving the
impression of traveling along a winding
road. Speed changes depending on the
music energy level.
MODE 6
The current equalizer curve is displayed.
17
Advertisement
Table of Contents
