Using The Remote Control - Pioneer DEQ-7200 Owner's Manual

Using the Remote Control
When the DSP/MAIN UNIT switch in the
remote controller supplied with head unit
is set to "DSP", some functions of this unit
can be performed with the remote
controller.
¢ The volume buttons and the attenuator
button operate this unit directly and do
not operate the head unit. (The volume
level of the head unit can be adjusted
with the volume buttons in the head
unit.)
¢ Some functions of this unit can be
operated with the DSP button.
Fig. 14
20
Parts Identification and Function
[21]
Fig. 15
[22] DSP button
When the user's curve is being recalled:
Used to recall the user's curve. Each time
the button is pressed, the selected user's
curve changes in the sequence of USER 1
+> USER 2 > USER 33> USER 43
USER 1....
[23] Attenuator button
Press to reduce the volume to 1/10 of its
current setting ( "ATT" is displayed in the
operation display [13].)
Pressing again returns the volume to its
original level.
¢ This function is available using the
remote controller unit only.