Advertisement
Adjusting the Equalizer
Curve
Parts Identification
Fig. 3
[3]
Display
[4]
Mode shift button
[5]
Nuance control up/down buttons
Level up/down buttons
[6]
Frequency up/down buttons
{8}
Speaker selector button
[9] User's curve memory buttons
{10} Factory preset curve buttons
Fig. 4
{13] Operation display
{14] Nuance control indicator
{15] Numeric display
{19}] User's curve memory indicators
[20] Factory preset curve indicators
VOCAL (F3)
|
Emphasizes the portion of the voice band
and minimizes the low-range to increase
articulation. Use this mode to emphasize
vocal signals or when listening to
conversation.
JAZZ (F4)
|
Compared with ROCK mode, emphasizes
the low- and high-ranges more intensively
so the wide-range feeling can be obtained.
Suitable to enjoy jazz music in a relaxed
environment.
Selecting the speakers to be
Equalized
Select the speakers to which the equalizer
effect is applied, from the front, rear or
both.
Press button [8].
Each press of button changes the speakers
affected by the equalizer as shown below.
pevre
ete 7
ON: The frame is displayed.
OFF: The frame is not displayed.
Front speakers only
Rear speakers only
Recalling a Factory Curve
Press one of (F1) to (F4) buttons [19] to
select the factory curve to be recalled.
(The display frame [20] of the selected |
factory curve lights.)
DEQ-7200
Equalizer Curve Recall
Four equalizer curves have been preset in
memory (factory curves} to allow pegine
with simple operation.
Factory Preset Curves
|
The 4 factory curves have been preset in
the memory.
ROCK (F1}
Focuses on the band of rhythm section of
rock music so that powerful sound can be
reproduced with supplemented low and
high ranges.
POPS (F2)
Particularly emphasizes the middle-range
so that light pops sound can be enjoyed.
Adjusting the Equalizer Curve
The equalizer curve can be adjusted i in the
following 2 ways.
Nuance control
Overall adjustment of the effect of
equalizer curve (nuance control) is
possible.
15-band graphic equalizer adjustment
The level of each of the 15 bands (at 2/3
octave intervals) can be adjusted.
Nuance Control.
1. Press button [4] to switch to the nuance
control mode.
Each press of button changes the mode
as shown below.
Fader/balance mode
v
Nuance control mode
(Example: ROCK (F1)}
Graphic equalizer mode
Advertisement
