Equipment Supplied - HP 3000 Series Installation And Service Manual

General Information
1-3. Equipment Supplied
The HP 30020A Intelligent Network Processor consists of the
follow ing:
•
One Intelligent
a sse mb 1y (PCA) ,
Netw or k Proces sor (INP)
part no. 30020-60001.
pr inted circuit
• One HP-IB Ribbon Cable, part no. 30020-60008 (standard
length) or part no. 8120-2846 (optional longer cable for in-
stallation in second card cage of HP 3000/33).
• One HP
~0020A
Intelligent Network Processor Installation and
Service Manual, part no. 30020-90001.
• One HP 30010A / 30020A Intelligent Network Processor Diagnos-
tic Procedures Manual, part no. 30010-90002.
Although a complete INP subsystem must include one or more INP-
to-modern cables, INP-to-INP direct-connect cables, or INP-to-SSLC
direct-connect cables, these cables are not included under the HP
J0020A product number. Each interconnecting cable or set of
cables required for the various configurations is ordered
separately under its own product number. See table 1-1 for a
list of the available cables.
I
CAUTION
I
Use of the longer lengths of the
ex t e r n a l i n t e r connect cables
requires special precautions. Long
cables are very susceptible to
induced transients. DO NOT run
cables outdoors or near electrically
"noisy" equipment.
The following test equipment is used to verify the proper opera-
tion of the
INP
while troubleshooting the data communications
network:
• Cable test connector.
• Board tes t hood.
These items of test equipment are supplied by the HP Customer
Engineer. Different part numbers of test connectors and test
hoods are required for different cable connection configurations.
Table 1-2 shows which test items are compatible with each set of
interconnecting cables.
1-2