Reshipment Instructions - HP 3000 Series Installation And Service Manual

Ma
intenance
d. Remove the INP PCA board (part no. 30020-60001) from the com-
p ute r ca r d ca g e •
e. Install the factory replacement INP PCA board in the same
slot in the computer card cage, using the procedure described
under "Hardware Installation Procedures" in section II, In-
stallation.
f.
Verify that the INP is now working
under "Installation Verification"
tion.
properly as described
in Section II, Installa-
5-19. RESHIPMENT INSTRUCTIONS
If the INP PCA and/or the associated cables are to be shipped to
Hewlett-Packard for service or repair, attach a tag to each item
identifying the owner and indicating the type of service or re-
pair to be accomplished. Include the part number and date code
of each item.
Pac kage the item (s) in the orig inal factory pac kag ing rna te rial,
if available. If the original packaging material is not avail-
able, standard factory packaging material can be obtained from
the nearest Hewlett-Packard Sales and Service Office. If
standard packaging material is not available, wrap the item(s) in
suitable cushioning material (Air Cap TH-240 Cushioning or
equivalent) and place the itern(s) in a corrugated carton (200-
pound test material). Seal the carton securely and mark it
FRAGILE to ensure careful handling.
5-13