Oiling The Blades; Transport Lock - Silvercrest SHBS 800 A1 Operation And Safety Notes

Plug the power adapter
which has a voltage that corresponds to that indicated on the type
plate.
Switch the product on using the ON / OFF button

Oiling the blades

It is recommended that you oil the blades before first use and after
cleaning to guarantee complete functionality (see Fig. G).
Always switch off the product before oil the blade.
Apply one or two drops of clipper oil
distribute them evenly.
Wipe off any excess oil with a cloth.
You can also use any acid-free oil (such as sewing machine oil).
Note: The blades can be oiled with or without the precision
attachment

Transport lock

The lock symbol
pressed when the transport lock is activated.
Press and hold the ON / OFF button
activate / deactivate the transport lock. The lock symbol
for a short time and then goes out.
Connecting the power adapter
It cannot be activated during corded use.
20 GB/IE/NI
into an easily accessible mains socket
14
and comb attachment
15
lights up continuously for a few seconds if a key is
11
between the blades and
19
.
16
for approx. 3 seconds to
4
deactivates the transport lock.
14
.
4
flashes
11