Advertisement
Activating the auto Channel Scan
Channel scan perform searches for
active signals in an endless loop for all
8 channels, 38 CTCSS codes and all
codes.
a. Press the MENU button 5
times
b. Press the UP or DOWN
button to begin scanning
channels when an active
signal is detected,
channelscan pauses on the
active channel.
c. Press the MENU button
again, CTCSS flashes on the
LCD screen press the UP or
Auxiliary Features_
Key Lock
The Key Lock feature allows user to
disable the UP. DOWN and MENU
buttons so that the PMR settings
could not be changed
accidentally.
a. To activate the Key Lock
feature, press and hold the
MENU button until
••
appears on the LCD Screen.
b. To deactivate the key Lock
feature, press and hold the
MENU button until ••OlT
disappears on the LCD
Screen. The PTT, and POWER
buttons will remain functional even if the
Key Lock feature is activated.
DOWN button to begin scanning the
CTCSS from 1-38.
d. Press the MENU button again, DCS
flashes on the LCD screen. Press the
UP or DOWN button to begin scanning
DCS code 1 -83.
e. Press the PTT button to oonfirm your
setting.
Microphone/Earphone/Charge Jack
The PMR is equipped with an auxiliary
microphone, earphone, and charge jack
located at the opposite side of the PTT
button.
LCD Screen Back Light
Every time a button is pressed (except
PTT and CALLbutton), the LCD Screen
back light will illuminate for 4 seconds.
Advertisement
