Download Print this page

Beko BT 100 User Manual page 8

Pmr private mobile radio
Hide thumbs Also See for BT 100:

Advertisement

Turning the Unit ON/OFF To Turn
a. Press and hold the POWER
button until the LCD Screen
turns ON and displays the
current channel.
To switch OFF;
b. Press and hold the POWER button
until the LCD screen turns blank. You
can hear a musical tone each time to
confirm.
Adjusting the Speaker volume
The volume level is shown by vertical
bars the LCD screen. You can change
the volume while using your PMR, or
while the unit Is Idle (swrtched on but
not in use), press the UP button to
increase, or press the DOWN button
to decrease the speaker volume.
Changing Channels
The PMR has 8 available channels, to
communicate with other PMR users
within range, you must all have your
PMR tuned to the same channel.
__
a. Press the MENU button
once, the current channel
number flashes on the LCD
Screen.
B
b. Press the UP or DOWN
button to select the desired
channel. The channel changes
from 1 to 8, or vice versa,
c.Press the PTT button to confirm the
channel setting.
Note: Refer to the "Channel Table"
section of this Owner's Manual for
detailed frequency listing.
6
Setting the CTCSS sub-channel
Each channel also has 38 sub-channels
to let you set up group of users within
the same channel for more private
communication. If you have set the sub¬
channel, you can only communicate
with other PMR users turned to the
same channel and sub-channel.
SETTING THE DCS ADVANCED
DIGITAL CODE.
Each channel also has 83 digital codes
to let you set up group of users for
more secured private communication.
a. Press the menu button 3
times. DCS code flashes out
the LCD screen.
b. Press the up or down
8
button to select the desired
DCS code.
c. Press PTT button to confirm the
channel setting.
To turn the sub-channel function off.
simply set the sub- channel to 0 (zero).
You can communicate with any PMR
user set to the same channel who also
turns off the sub-channel operation (or
whose PMR unit does not have the
feature).
a. Press the MENU button
twice, the current CTCSS sub¬
channel number flashes on the
LCD Screen.
b. Press the UP or DOWN
button to select one of the
38 CTCSS sub-channels, c.
Press the PTT button to confirm the
sub-channel setting.
Transmitting and Receiving
The PMR transmission is "one way-at-

Advertisement

loading