Sony DTC-700 Operating Instructions Manual page 24

Digital audio tape deck

Hide thumbs Also See for DTC-700:

CD Synchronized Recording

If a Sony Compact Disc player with a Remote Commander is

available, you can start playback of the CD player and the

recording of the DAT deck, using the Remote Commander.

Position the Remote Commander so that the signal reaches

the remote sensor of both the DAT deck and the CD player.

To start recording

Use the Remote Commander of the DAT deck.

Insert a cassette.

Insert the disc in the CD player.

Press CD SYNCHRO STANDBY on the Remote Commander of the

DAT deck.

The deck enters the record-pause mode.

Press CD SYNCHRO START on the Remote Commander of the DAT

deck.

Recording on the DAT deck starts, and about 1 second later, playback of

the CD player starts.

To stop recording

Press CD SYNCHRO STOP on the Remote Commander of

the DAT deck.

Note

To momentarily stop recording (of the DAT deck) and playback

(of the CD player), press the tl buttons on both the DAT deck

and the CD player.