Advertisement
Remote Commander Operation
Each button on the Remote Commander functions in the same
way as those having the same name on the front panel.
However, the following operations cannot be performed using
the Remote Commander. Use the front panel controls instead.
Turning the power on and off
Selecting digital (optical/coaxial)/analog input source
Adjusting the recording level and headphones level
Setting the timer recording/playback
Selecting the recording mode (standard or long)
The following operations can be performed only with the
Remote Commander.
¢ Activating CD synchronized recording using a Sony CD
player and controlling the CD player
¢ Locating the desired selection on the Compact Disc or
setting the CD player in the pause mode (possible only
when a Sony CD player is used.)
e Repeat play (A-B)
« RMS* play
*RMS: Random Music Sensor
Installing Batteries P|
Insert two R6 (size AA) batteries with correct polarity, and
close the lid.
Notes on remote control
« Do not expose the remote sensor on the deck to strong light such as
direct sunlight, lighting apparatus, etc.
* Do not place any obstructions between the Remote Commander and
the remote sensor, or else operations will not be performed correctly.
¢ The controllable range is limited. Point the Remote Commander
directly at the remote sensor on the deck.
e When remote control operation distance becomes shorter, the
batteries are weak. Replace both batteries with new ones.
To avoid battery leakage
When the commander will not be used for a long period of time,
remove the batteries to avoid damage caused by battery leakage and
corrosion.
Battery life
About half a year of normal operation can be expected when using the
Sony SUM-3 (NS) batteries.
Advertisement
