Advertisement
26
Sub Fete (=13)
In addition to the ordinary audio signals, various control codes
called sub codes can be recorded on the DAT cassette tapes
to ease recording and reproducing operation. A desired
selection can be called up or time information can be
displayed using the sub codes, for example.
The sub codes, start ID, program number, skip ID, end !D,
program time and absolute time, are available on this unit.
Sub codes are written on the tape separately from the audio
signals, so the audio signals are not affected. (Refer to
"Technical Information" for more details.)
Sub codes, except the absolute time, can be rewritten after
the audio signal recording has been completed. The
recorded audio signals are not affected by the rewritten sub
codes.
« When you record the tape with sub codes written onto a
new tape via digital-to-digital connection, the sub codes to
be written on the new tape are following:
Start IDs
The same as the codes written on the
ar
originaltape
Skip IDs
The same as the codes written. on
on the
original tape
Program
New ones will be written according to the
numbers
DAT deck you use
Absolute time
| New ones will be written
The one written on the original tape will
not be written
End ID
When you use analog-to-analog connection, no sub codes on
the original tape will be written onto a new tape. New codes
will be written according to the DAT deck you use.
Start ID
This signal indicates the start of a music selection. You
can locate the position of the start ID precisely. This signal
should be written at the beginning of the selection.
es
2
2
Aa
j
WwW
Program number
This signal gives a number to a selection. You can record
it where the start ID is written. By designating this number,
you can choose the desired selection directly or program
selections in a desired order.
Zz
A |
Ka
Program number
Selection
:
|
26
Skip ID
This signal can be marked on the selection wherever you
_ _ _
wish. When the SKIP PLAY indicator is lit during playback,
|
the deck will skip at high speed from where the skip ID is
marked to the next start ID, and then playback will start
again. Record this skip ID at the beginning of portion you
want to skip.
Skip ID
Start ID
Advertisement
