YUTAKI CASCADE CONTROLLER
•
Select Yes if an electrical backup heater is installed.
•
This screen appears only when no boiler is installed.
•
Press OK button.
•
Select the bivalent point for boiler or electric backup heater (from -20 ºC to 20 ºC).
•
Press OK button.
•
Select the type of room thermostat installed in circuit 1: None, wired or wireless.
•
Repeat this step in case of circuit 2.
•
Press OK button.
•
Select the number of modules installed (from 1 to 8)
•
Select OK button.
119
PMML0510 rev.1 - 10/2019