System Configuration - Hitachi YUTAKI Series Installation And Operation Manual

YUTAKI CASCADE CONTROLLER

8.6.2 SYSTEM CONFIGURATION

In system configuration menu it is possible to configure all the system settings.
General configuration:
• Holiday Mode
• Air Eco Offset
• Room Thermostats
• Central Operation
Timer and schedule configuration:
• Circuit 1
• Circuit 2
• DHW
• Swimming Pool
• Delete all timers configuration
DHW configuration:
• Status
• Mode
• Control
• Setting temperature
• HP control
• HP control setting
• Maximum setting temperature
• Differential temperature
• HP OFF differential temperature
• HP ON differential temperature
• Maximum time
• Cycle Time
• Space Priority status
• Space Priority temperature
• DHW Heater
• Anti Legionella
Complementary Heating configuration:
• Heating Source (HP Only, HP+Boiler,
HP+Heater, HP+Heater+Boiler)
• Electrical heater
• Boiler combination
• Solar combination
Heat pump configuration:
• Water Pump Configuration
• Night Shift
• Outdoor Average Timer
• Minimum ON Time
• Minimum OFF Time
• Seizure Protection
126 PMML0510 rev.1 - 10/2019
1 / 2
2 / 2
Cascade configuration:
• Supply setting offset
• Modules configuration
Space Heating / Cooling configuration:
• Circuit 1
• Circuit 2
Swimming Pool configuration:
• Status
• Setting temperature
• Offset temperature
Optional functions configuration:
• System
• Space functions
• DHW
• Emergency Operation
I/O and Sensor configuration:
• Inputs
• Outputs
• Auxiliary sensors