(Optional) Wiring for a UPS Installed Outside a Cabinet
1. Connect the ground cable, as shown in the figure.
2. Connect the input power cables, as shown in the figure.
Rear view
(Optional) Circuit breaker input
3. Connect output power cables for the air conditioner and IT cabinets, as shown in the figure.
Rear view
Connecting air conditioner cables
NOTE
A ground terminal is typically
marked as
NOTE
The actual number of cables to be
connected and the positions vary
depending on the project design.
Rear view
(Optional) ATS input
Rear view
Connecting IT cabinet and load cables
12
.