LOCATION OF SCREEN AND FOCUS VR'S
To remove the Speaker grille and Front panel.
j++
Speaker grille
REPLACEMENT OF HIGH VOLTAGE CABLE
1. When replacing Anode Lead or Anode Cap with new
one, remove Lead Holder from old lead as shown in
ANODE LEAD
figure below, and put it on new lead. Do not throw away
Lead Holder.
NOTE : THE LEAD HOLDER
iS ATTACHED
TO
TPAS5S007 (2450), BUT IS NOT ATTACHED TO
ANODE LEAD AND ANODE CAP. RUBBER
BOOT IS ATTACHED TO ANODE LEAD AND
ANODE CAP.
2. Detaching Lead Holder
OLD
RUBBER BOOT
ANODE LEAD
or
ANODE CAP |
LOCK
LEADHOLDER
= Cuthere rubber boot
and lead together to
Z450 TPASOO7
detach Lead Holder.
Fig. b
28
No.51281