Advertisement
30
SERVICE
MODE
(ADJUSTMENT MODE)
1, ENTERING TO SERVICE MODE
1) Press ¢X button once on
Remote Control.
OK
keep pressing.
= Le |
2) Press ¢X button again to
3) While pressing the 2X button,
press MENU button on TV set.
item
s
Data
(Service mode display)
2. DISPLAYING THE ADJUSTMENT MENU
1)
Press MENU button on TV.
Service mode
s
Press
Press
Adjustment mode
item
Data
3. KEY FUNCTION IN THE SERVICE MODE
The following key entry during display of adjustment menu provides special functions.
Screen adjustment mode ON/OFF:
Test signal selection :
Selection of the adjustment items :
Change of the data value :
Adjustment menu mode ON/OFF :
Initialization of the memory (QA02) :
Reset the count of operating protect
circuit to."00":
"RCUT" selection :
"GCUT" selection :
"BCUT" selection :
"CNTX" (or "SCNT") selection :
"COLC" (or "SCOL") selection :
"TNTC" selection :
Convergence adj :
Test audio signal ON/OFF (1kHz) :
Self diagnostic display ON/OFF :
-® button (on TV)
-® button (on Remote)
Channel a/¥ (on TV or Remote)
Volume 1 +/— (on TV or Remote)
MENU button (on TV)
CALL + Channel button on TV (A)
CALL + Channel button on TV (¥)
1 button
2 button
3 button
4 bution
5 button~ - - -Color thickness correction
6 button
note: Displayed differently as shown' below, de-
Ade button
pending on the setting of the receiving color
8 button
system.
9 button
COLP (PAL)
SCOL (NTSC)
COLS (SECAM)
CAUTION : Never try to perform initialization unless you have changed the memory IC.
No.51281
Advertisement
