Advertisement
DESIGN
MODE
1. ENTERING TO DESIGN MODE
1) Select the Service mode..
2} While pressing CALL buttonon Remote
3) Press MENU button on TV.
and press MENU button on TV.
$
Press
~<— ITEM
~
~~ DATA
~<— Press
(Design mode)
(Adjustment mode)
When QA02 is initialized, items "OPTO" and "OPT1" of DESIGN MODE are set to the data of the representative model of this
chassis family.
Therefore, because ON-SCREEN specification remains in the state of the representative of model. This model is required to
reset the data of items "OPTO" and "OPT1".
2. SELECTING THE ADJUSTING ITEMS
Every pressing of CHANNEL YW button in the design mode changes the adjustment items in the order of table-3.
-(& button for reverse order}
3. ADJUSTING THE DATA
Pressing of VOLUME 4 or ¥ button will change the vatue of data.
No.54281
33
Advertisement
