Toro 74760 Operator's Manual page 21

Figure 15
1. Park (brake) position
2. Center, unlock position
3. Forward
g004532
4. Backward
5. Front of the machine
Using the Smart Speed
System
The Smart Speed TM
below the operating position
operator a choice to drive the machine at 3 ground
speed ranges—trim, tow, and mow.
1. Smart speed lever
To change speeds, do the following:
1. Move the motion-control levers to neutral and
outward to the P
2. Disengage the blade-control switch
3. Adjust the lever to the desired position.
The following are only recommendations for use.
Adjustments will vary by grass type, moisture content,
and the height of the grass.
Suggested Trim
uses:
Parking X
Heavy, wet X
grass
Training X
Bagging
Mulching
Normal
mowing
Transport
Trim
This is the lowest speed. The suggested uses for this
speed are as follows:
21
TM Control
Control-System lever, located
(Figure 16), gives the
Figure 16
position.
ARK
Tow Mow
X
X
X
X
g027625