Transportation And Storage - Husqvarna BGS 250 Operator's Manual

Problem
The product stops
again when you start
it.
Transportation of the product
• Safely attach the product during transport to prevent
damages and accidents.
• Put some type of protection on the product
during transportation. The protection keeps natural
elements such as rain and snow away from the
product.
• The product can be divided into 2 components. This
makes the transportation easier.
• Always use the lifting eye that is attached to the
product when you lift and move the product.
To set the product in transport position
1. Disconnect the power plug.
2. Disconnect the dust extractor.
3. Fold down the handle and the handlebar.
To attach the product to a vehicle for
transportation
The product has holes that are used with tie-down
straps to attach the product to the transportation vehicle.
20
Cause

Transportation and storage

Solution
Speak to an approved service center.
1. Attach the tie-down straps in the holes.
2. Attach and tighten the tie-down straps to the vehicle.
To lift the product
WARNING:
equipment has the correct specification to
lift the product safely. The type plate on the
product shows the product weight.
WARNING:
or near a lifted product. Keep bystanders
away from the work area.
WARNING:
product. Make sure that the lifting eyes are
correctly installed and not damaged.
4X
Make sure that the lifting
Do not walk or stay below
Do not lift a damaged
2363 - 002 - 12.03.2024