Husqvarna BGS 250 Operator's Manual page 9

• Do a check of the safety devices regularly, refer to
Maintenance schedule on page 16 . If the safety
devices are damaged or do not operate correctly,
speak to your Husqvarna approved service agent.
• Do not change the safety devices.
ON and OFF buttons
The ON and OFF buttons start and stop the product.
ON and OFF buttons
The ON and OFF buttons start and stop the product.
2363 - 002 - 12.03.2024
To do a check of the ON and OFF buttons
1. Push down the handle lightly to lift the grinding
head from the surface, approximately 1 mm. This
decreases the pressure against the surface. Do not
lift the grinding head fully from the surface.
2. Push the ON button to start the product.
3. Wait for 5 seconds to let the product operate at idle
speed.
4. Push the OFF button.
5. Make sure that the motor stops.
9