Label Printer Setting; Device Connection - Brother MELSEC iQ-F TD-4420TN Program Reference Manual

3. Label printer setting

3.1. Device connection

PC device and connection is necessary to connect the programmable controller with the printer via serial or
Ethernet to configure the communication settings at printer side. But once the setting is completed, there is no
need to connect all the time.
Label printer
PC

Use the PC installed with Windows series.
USB cable type

Brother label printers
TD-4420TN
TD-4520TN
TD-4650TNWB
TD-4650TNWBR
TD-4750TNWB
TD-4750TNWBR
TJ-4005DN
TJ-4010TN
TJ-4020TN
TJ-4021TN
* Use a USB cable of 1.5m or shorter.
* For the above label printers, connection operation check with the Mitsubishi programmable controller has
already finished, but other models supporting the FBPL printing command are possible to be connected. For
more detail, refer to the following URL.
(https://support.brother.com/g/s/es/dev/en/command/reference/index.html?c=eu_ot&lang=en&navi=offall&co
mple=on&redirect=on)
USB cable
TJ-4021TNR
TJ-4120TN
TJ-4121TN
TJ-4121TNR
TJ-4420TN
TJ-4422TN
TJ-4520TN
TJ-4522TN
TJ-4620TN
PC
USB connector type
B type
11
MELSEC iQ-R Brother Label Printer Sample Program Reference Manual