1. Introduction
Precondition
1.1.
This manual explains the product under the precondition that the following knowledge has already acquired.
Mitsubishi Electric programmable controller ladder program, ST language, and FB (Function Block) are
fully understood
Development tool GX Works3 operation method is fully understood
Guidance for using the manual
1.2.
The content of the manual you need to be referred to differs depending on which communication method
your system uses to connect the sequencer and the label printer.
1.2.1. For system structure with serial connection
2. Outline
2.1. Outline of "Sample program"
2.2. Label printer structure
2.2.1. RS-232C connection cable connection information
2.3. System structure
2.3.1. For serial connection
3. Label printer unit setting
3.1. Device connection
3.2. Use software
3.3. Serial communication settings
4. Setting at programmable controller side
4.1. For serial connection
5. Sequence program outline
5.1. Function outline
5.2. Program outline
6. Sequence program explanation
6.1. For serial connection
4
MELSEC iQ-R Brother Label Printer Sample Program Reference Manual