Toro Groundsmaster 5910 Operator's Manual page 20

Power Point
The power point, located next to the console on the side
of the power center, is used to power optional electrical
accessories (Figure 10).
Seat-Adjusting Lever
Pull out the lever to slide the seat forward or rearward.
Seat-Back-Adjusting Lever
Move the lever to adjust the seat-back angle.
Armrest-Adjusting Knob
Rotate the knob to adjust the angle of the armrest.
Info Center
Screen Functions
•
Press the corresponding button to view screen 1 or screen
2, to stop the audible alarm, to view the fault screen, or to
exit (Figure 13).
Figure 13
1. Screen 1
2. Screen 2
3. Audible alarm
•
If a fault appears on the screen, press any key to view the
active fault advisory.
Note: Contact your supervisor or mechanic to relay the
fault advisory and determine the course of action.
•
Press the arrow keys to navigate the fault screen.
•
Press any key to reveal the information keys on the screen.
4. Fault screen
5. Exit
Operator Information
There are 2 screens that monitor and display the machine
functions that you can use.
Screen 1 displays the following:
•
Top, Left Gauge—Engine-Coolant Temperature
•
Top, Right Gauge—Fuel Level
•
Left to Right on the Bottom Half
1. PTO Engaged
2. Parking Brake Engaged
3. Fan Reversing
4. Cruise Control Engaged
5. H/L (High/Low speed range)
•
Bottom, Left Corner—Air-Intake Heater Active
•
Bottom, Middle—Traction Assist Engaged
•
Bottom, Right—Machine Hours
Screen 2 displays the following:
•
Top, Left Corner—Engine rpm
•
Top, Right Corner—Hydraulic-Oil Temperature
•
Lower, Left Corner—Battery Voltage
•
Lower, Right Corner—Service Due
20