Miele H 2465 B Operating And Installation Instructions page 70

Problem solving guide
Problem
12:00 appears in the
display.
Power cut appears in the
display.
Max. op. hours reached
appears in the display.
Fault and a fault code
not listed here appears
in the display.
A noise can be heard
after a cooking process.
The oven has switched
itself off.
Cakes and biscuits are
not cooked properly
after the duration given
in the cooking chart.
70
Possible cause and remedy
The power supply was interrupted for longer than
5 minutes.
 Reset the time of day (see "Settings – Time of
day").
Cooking process durations will also need to be
reset.
There has been a brief power cut. This has caused
the current cooking programme to stop.
 Turn the function selector to 0.
 Restart the cooking programme.
The oven has been operating for an unusually long
time. This has triggered the safety switch-off
function.
 Confirm with OK.
The oven is now ready to use.
A fault has occurred that you cannot resolve.
 Call Miele.
The cooling fan remains switched on after a cooking
programme (see "Settings – Cooling fan run-on").
The oven will switch itself off automatically to save
energy if no other action is taken within a certain time
frame after switching it on or after the end of a
cooking programme.
 Switch the oven back on.
A different temperature from the one given in the
recipe has been used.
 Select the temperature required for the recipe.
The ingredient quantities used are different from
those given in the recipe.
 Check whether you have amended the recipe. The
addition of more liquid or more eggs makes a
moister mix which would take longer to cook.